manifold machining

[nacelp]

Sounds like #1 is the easiest.
That's what I'd do.
Make it easy, and cheap, it don't work carve a new one.
what ya gonna do if say heat is a bigger problem, then expected, and you
have to move them from the head?...
I've used literally pounds (OK kilograms, maybe decagrams(?))of epoxy
filling manifolds I screwed up.
Grumpy
  The throw away manifold champian.  Just look at my cross fire collection
<g>...



> >  1. About 5-6 inches away from inlet valve, using existing (carby) inlet
> >     manifold. Has a 90 degree turn (injectors vertical, valve stems
> >     horizontal)
> >
> >  2. Directly onto back of the inlet valve, but the injector hole is
> >     then machined into the (alloy) head itself. I don't see a need
> >     for a bung for this position.


----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org