Shorty plugs (off topic)

[Bruce Plecan]

Jacobs has some ceramic end plug wires, I've never used them thou
Firebraid (?) has some real good high temp sleeve stuff
If you have less then 1/8" clearance around what ever you use, you'll never
solve the problem, there has to be an air gap....
Grumpy



From: "Dave Zug" <dzug at delanet.com>
> Sorry I'm pullin my hair out. I NEED to find a source for 3/4" (long
thread)
> "shorty" spark plugs for header clearance problems. The common cure
(accel)
> only makes the short thread style that are wrong for my alum heads. I have
> tried filing the top 1/8" and have banged a ding in the headers AND put
heat
> shield thingys on the wires but eventually (3 weeks!) the wires burn.
> I'm sure with the other interests of most on the list there must be help
> here.
> OFFLIST PLEASE, unless you think its ON topic.


----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org