DIS for GMECM

[Speartech]

The special cover is marine part.  If I had some MEFI2 info I would share 
it. I do have the complete schematic of the controller including the 
optional inputs (like O2 sensor), that were never activated in the 
software. But I'm guessing you're after programming info, which I don't have.

	John

 >
 >
 >Date: Wed, 06 Dec 2000 01:04:31 -0500
 >From: Shannen Durphey <shannen at grolen.com>
 >Subject: Re: DIS for GMECM
 >
 >
 >Hello! This is interesting...
 >2 questions :
 >Is this special cover package a marine or automotive part?
 >Do you have any MEFI2 info that you're willing to share?
 >Shannen
 >
 >
 >Speartech wrote:
 >>
 >> Exactly!!  Makes me think back to the LT1 Optispark distributor.  All the
 >> hoopla about 1 degree resolution with the 360 deg optical sensor, and then
 >> go and hook it all together with a timing chain and a little splined drive
 >> off the front of the camshaft!  Many folks are unaware of the fact that
 >> when the LT1's were used in the Mastercraft ski boats, they used the
 >> Northstar DIS, NOT the Optispark. The Nstar reluctor wheel mounts on the
 >> back of the harmonic balancer, and a new timing chain cover is used with
 >> the 2 crank sensor mounting saddles cast right into the cover. It's a neat
 >> little package! The 2 crank sensors feed directly into the full-function
 >> DIS module, it decodes and processes the signals, and then you have the
 >> usual connection to the ECM (REF HI, REF LO, BYPASS, and EST. In the marine
 >> application they used the MEFI-2 controller, but hey, it COULD have been a
 >> 730/727 controller.
 >>
 >>         John

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org