Injector Sizes All the Same?

[chetwagner at qwest.net]

These screws do not make a difference, it all depends on the size of 
the holes in the tip.  I know, I have tried to make them adjustable with 
some poor results.

On 10 Dec 2000, at 15:19, WEG1192 at aol.com wrote:

> I've noticed that my 3.1L TBI injectors have an allen socket screw
> staked in place on top of each injector. My 5.7L injectors have the
> same screw but appear to be backed out a few more turns before
> staking. Is it possible that all injectors , are the same and that these
> screws calibrate the injectors for different flow rates? I don't want
> to unstake it and destroy the injector if any list members know the
> answer.
> 
> Thanks
> 
> JW
> ----------------------------------------------------------------------
> ------ To unsubscribe from gmecm, send "unsubscribe gmecm" (without
> the quotes) in the body of a message (not the subject) to
> majordomo at lists.diy-efi.org
> 
> 


----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org