Ramjet

[Chipsbyal at aol.com]

The RamJet uses the MEFI3 marine PCM. It is a speed density system, however 
it is not a "true" speed density system. There are no "VE" tables or injector 
constants to be calibrated. All injector pulse widths are directly taken from 
the fuel tables. This PCM if properly recalibrated can use O2 feedback. One 
more thing, the L31 heads are valve lift restricted. I'm not sure of the 
exact spec, but I've heard .500 is about it.
AL
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.diy-efi.org/pipermail/gmecm/attachments/20001215/4b3a6c66/attachment.html>