Olds 350 donor

[ae2598 at wayne.edu]

Bendix huh?  The only Bendix PFI setup I was aware of was the one on the
Cosworth Vega.  Very primitive, didn't use any digital logic.

Now THAT would be a cool motor to adapt a modern ECM to.. Makes me
wish I still had mine!

On Sat, 16 Dec 2000, Len Sabatine wrote:

>   Early 80sCads had OLDS 350  PFI  that ran on Old Bendix Ecm. Prolly graft 
> in a  7727 / 7730 [8262]  and harness could be a plan.
>   Don't remember impedance of the  Bosch or Lucas injectors that were used 
> , they may not be compat with late inj drivers.
>   FYI the  Cad 500 in that year range had a similar setup. If you have a 
> 2004R trans , it should have "universal " case, so any GM engine will
>   fit. A 500 Cad would put some zip in the Caprice wagon. Lots of 
> possibilities if you can find suitable engine Hw from recyclers.
>   Len
> At 01:44 PM 12/16/2000 -0400, you wrote:
> >Its' time to get serious about replacing the anemic 'vin y' motor in my 
> >wife's Caprice wagon,  so I'm about to go shopping for an Olds 350 'R' 
> >motor.  What would be a suitable donor?  I'm thinking it'll be an early to 
> >mid '90s car,  since I'm looking for a FI motor,  harness,  and computer.
> >
> >Thanks,
> >
> >Bill
> >
> >----------------------------------------------------------------------------
> >To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> >in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> 
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> 
> 


----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org