EGR valve for SBC

[Gerald Pelnar]

----- Original Message -----
From: <KasaRyan at aol.com>
To: <gmecm at diy-efi.org>
Sent: Thursday, December 21, 2000 12:18 PM
Subject: Re: EGR valve for SBC


> When I built my 383. i just went to autozone and got an EGR valve for a
> mid-70's pickup, because I figured they are all the same right? -- wrong
it
> has POS marked on it which is not piece o' $hit, but positive backpressure
is
> required to open the valve, of which I have none.  Does anyone know what
> wells PN I can use with a standard SB aftermarket (specifically holley
> 300-64) manifold so I can enable my EGR.  I mean a real simple one, that
> opens when vacuum goes to the port.

Ryan--

Just curious as to your reasons for wanting EGR to work. Kansas isn't going
to start emission inspections are they?

Gerald Pelnar
wd0fyf at mpks.net
http://www.mpks.net/homepage/wd0fyf/
McPherson, KS

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org