Memcals

[Swayze]

I'm not EE illiterate but I barely
remember doing a few calcs with rc
circuits used as integrators and
differentiators and am wondering if
there are any caps in the netres. I'd
like to see the schematic.with just
resistors it may be strictly a 'linear'
circuit for limping home.I would assume
that a base pulse width is generated
somewhere to feed the circuit and it may
be possible to adjust it.'748... is that
what's in an '88 2.5l s-10 by any
chance.
byE
Mike S.

Ludis Langens wrote:
> 
> Swayze wrote:
> >
> > has anybody documented the netres
> > circuit in a memcal? (is it a black goo
> > device--I haven't snagged an ecm
> > yet).I'm a newbie  and learned not to
> > make any mods to a  circuit without a
> > schematic(long ago).
> 
> I've traced out the schematic of the 1227748 ECM.  This ECM is somewhat
> unique in not using a MEMCAL.  Instead, it has a bunch of resistors
> soldered to the PCB.  With a MEMCAL, the resistor networks move into the
> MEMCAL.  Do I hear a volunteer that'll figure out the correlation
> between the two types?
> 
> --
> Ludis Langens                               ludis (at) cruzers (dot) com
> Mac, Fiero, & engine controller goodies:  http://www.cruzers.com/~ludis/