January 2000 Archives by thread
Starting: Sat Jan 1 00:27:36 GMT 2000
Ending: Mon Jan 31 23:53:20 GMT 2000
Messages: 1015
- Prom ID with 16198262 ECM
James Wilson
- 16176424 PCM - is the same as?
Richard Wakeling
- Happy new year from Oslo to every one!
Espen Hilde
- 16176424 PCM pinouts
Peter Gargano
- Dual TBI units - How To Handle Twin IAC's?
Bruce Plecan
- Hey, what happened to the lights?
TK
- 16176424 PCM pinouts
Peter Gargano
- Subject: [admin] List services (automated monthly post)
jsg at esl.eng.ohio-state.edu
- Prom ID with 16198262 ECM
Bruce Plecan
- Att. Bruce here is the Bin File
James Wilson
- DIS Module component ID
Peter Gargano
- 16176424 PCM pinouts
Ross Myers
- EGR and MAP
Dave Williams
- 16176424 PCM pinouts
Ross Myers
- knock knock goes the jeep....
Ross Myers
- GM Marine 10-pin DLC?
Andrew K. Mattei
- knock knock goes the jeep....
Terry
- 1227165.. apyu bcc HELP!
Bruce Plecan
- knock knock goes the jeep....
Bja1078 at aol.com
- 730/727
Bja1078 at aol.com
- GM Marine 10-pin DLC?
Chipsbyal at aol.com
- knock knock goes the jeep....
Ross Myers
- DIS Module component ID
Ross Myers
- 730/727
Ward
- Few questions with regard to programming 101-Big Picture
Shannen Durphey
- EGR and MAP
Dave Williams
- 7730 memory locations
Geoff Richards
- DIS ?.
Bruce Plecan
- V6 / 730 ALDL datastream
Bob Valentine
- Nissan Pulsar Exa 195 ECU Pinouts
Andrew Wakeling
- Prom ID with 16198262 ECM
Programmer
- W32/NewApt virus
hmacneal at allegro.net
- V6 / 730 ALDL datastream
Jeremy Gonyou
- Wanted M68HC11EVB- Evaluation Board
PHXSYS at aol.com
- Information for converting old carburated systems
Ch-complat at www.dci.co.ir
- sample documented 68hc11 for single point injectio
Ch-complat at www.dci.co.ir
- Odp: GM Marine 10-pin DLC?
Marek Skrzypiec
- DIS ?.
JTesta1966 at aol.com
- Prom ID with 16198262 ECM
James Wilson
- DIS ?.
Frederic Breitwieser
- DIS ?.
JTesta1966 at aol.com
- plenum volume
Kevin Reynolds
- Few questions with regard to programming 101-Big Picture
Shannen Durphey
- 730/727
Bja1078 at aol.com
- 730/727
Bja1078 at aol.com
- 730/727
James Wilson
- 7747 "shaking" the vechile?!
Mika Helander
- 7747 "shaking" the vechile?!
JTesta1966 at aol.com
- 1227165.. apyu bcc HELP!
Mike Rolica
- 1227165.. apyu bcc HELP!
Andrew K. Mattei
- 94/95 GM PCM + M6 tranny question
Dave Hempstead
- 1227165.. apyu bcc HELP!
Mike Rolica
- 730/727
Dave Williams
- 1227165.. apyu bcc HELP!
ECMnut at aol.com
- 1227165.. apyu bcc HELP!
Mike Rolica
- update on knock knock goes the jeep....
John S. Gwynne
- 730/727
Squash
- Mike bumping into things
Pat Ford
- 730/727
Pat Ford
- Mike bumping into things
Mike Rolica
- Mike bumping into things
Pat Ford
- Mike bumping into things
Mike Rolica
- Need help on 87 2.8v6
Mike Rolica
- 730/727
Dave Williams
- How to read E6 eeprom while programming ?
PHXSYS at aol.com
- Need help on 87 2.8v6
Mike Rolica
- 730/727
Pat Ford
- 730/727
Dave Williams
- 730/727
Dave Williams
- Spk747_3.ecu
Jon Fedock
- 1227165.. apyu bcc HELP!
Walter Sherwin
- 730/727
Dave Williams
- 730/727
Dave Williams
- Mapedit? - http://www.uq.net.au/~zzchack/smapedit.html
Christian Hack
- 730/727
ECMnut at aol.com
- 730/727
ECMnut at aol.com
- Need help on 87 2.8v6
Bob Valentine
- 7747 "shaking" the vechile?!
Mika.Helander at softbit.fi
- P4 and on Memory Mapping
Ross Myers
- 730/727
Dave Williams
- 730/727
Dave Williams
- Need help on 87 2.8v6
Mike Rolica
- EST
Barry Tisdale
- 89 MAF Volt to freq conversion
Mike Rolica
- .ecu
cwagner at info2000.net
- .ecu
Mike Rolica
- CarBytes v2
Paul Blackmore
- .ecu
Mike Rolica
- .ecu
cwagner at info2000.net
- .ecu
cwagner at info2000.net
- P4 and on Memory Mapping
Ward
- 165 to late MAF
Thomas Matthews
- 89 MAF Volt to freq conversion
Mark Romans
- 89 MAF Volt to freq conversion
Marteney, Steven J.
- sitepage(previously 89 MAF Volt...)
Mike Swayze
- 89 MAF Volt to freq conversion
Marteney, Steven J.
- Archives
Geoff Richards
- Archives
Dave Williams
- More stunning news from CSH, HQ
Bruce Plecan
- 730 DIS
Dave Williams
- Archives
Greg Hermann
- P4 and on Memory Mapping
Ross Myers
- New to the group..
Ross Myers
- Need help on 87 2.8v6
Walter Sherwin
- New GM web site
Ross Myers
- Archives
Mike Rolica
- Archives
Dave Williams
- Archives
Mike Rolica
- Archives
Dave Williams
- Archives
ECMnut at aol.com
- 730 DIS
Mike Rolica
- 165 to late MAF
Marteney, Steven J.
- Archives
Dave Williams
- more DIS questions
Mike Swayze
- 730 DIS
Douglas Ratcliffe
- P4 and on Memory Mapping
Ward
- 730 DIS
Douglas Ratcliffe
- x-fire pinouts
Kevin Reynolds
- 730 DIS
Douglas Ratcliffe
- Datasheet for MC33199
Andrew Mattei
- P4 and on Memory Mapping
Ross Myers
- X-fire
Ross Myers
- 165 to late MAF
Bja1078 at aol.com
- Airbag DIag, was: re: Mike bumping into things
Qeskimeaux at aol.com
- Archives
ECMnut at aol.com
- 730 DIS
Qeskimeaux at aol.com
- Opel Barina Pin-outs
Richard Wakeling
- 730 DIS
Dave Williams
- VSS output
Shawn R. Lin
- 730 DIS
John T. Martin
- Odp: Datasheet for MC33199
Marek Skrzypiec
- 730 DIS
Dave Williams
- x-fire pinouts
Ross Myers
- more DIS questions
Bob Valentine
- 730 DIS
Bob Valentine
- more DIS questions
Greg Hermann
- 730/727
ECMnut at aol.com
- Timing Jump on 165/TPI System
Craig Moates
- more DIS questions
Greg Hermann
- DIS Tach signal
Shawn R. Lin
- 4 Cyl 730
Bruce Plecan
- L -plates
Paul Smith
- Snap On Scan Tool
Andrew K. Mattei
- more DIS questions
Greg Hermann
- Timing Jump on 165/TPI System
John T. Martin
- Timing Jump on 165/TPI System
Qeskimeaux at aol.com
- EST
Programmer
- more DIS questions
Ward
- EST
Mark Romans
- Timing Jump on 165/TPI System
Mark Romans
- Timing Jump on 165/TPI System
Mark Romans
- Timing Jump on 165/TPI System
Mark Romans
- Freighting an engine.
Qeskimeaux at aol.com
- Freighting an engine.
TK
- Timing Jump on 165/TPI System
Mark Romans
- eprom carrier eliminator
Marc Piccioni
- Timing Jump on 165/TPI System
Mark Romans
- Emulating... the pros
Shannen Durphey
- Snap On Scan Tool
Ross Myers
- Datasheet for MC33199
Ross Myers
- IAC Orifice
Mike Swayze
- 4 Cyl 730
Pat Ford
- LT1 manifold question (sort of NOT ECM related)
Marteney, Steven J.
- LT1 manifold question (sort of NOT ECM related)
Marteney, Steven J.
- Crank Angle Sensors
Rich Vandervoort
- Crank Angle Sensors
Dave Williams
- Timing Jump on 165/TPI System
Mark Romans
- Snap On Scan Tool
Shannen Durphey
- dead simple recap
Dave Williams
- VSS on 730
Dave Williams
- Timing Jump on 165/TPI System
Mike Rolica
- EST
Mike Rolica
- Timing Jump on 165/TPI System
Mike Rolica
- dead simple recap
Frederic Breitwieser
- dead simple recap
Guenther,Max [ASCO/PA]
- prom emulator circuit--PCAD
Mike Swayze
- prom emulator circuit--PCAD
Mike Rolica
- Timing Jump on 165/TPI System
Mark Romans
- Timing Jump on 165/TPI System
Mark Romans
- Ken & Shannon re:Crossfire to 7747 pinout
Kevin Reynolds
- 68HC11 Disassembler...
Donald Whisnant
- dead simple recap
Dave Williams
- another Xfire to 7747 wiring question.
Kevin Reynolds
- Odp: OBDII cable source
Marek Skrzypiec
- injectors
cwagner at info2000.net
- dead simple recap
Dave Williams
- VSS on 730
Dave Williams
- Snap On Scan Tool
Walter Sherwin
- again:eprom emulator circuits-pcad
Swayze
- Snap On Scan Tool
Frederic Breitwieser
- Snap On Scan Tool
Shannen Durphey
- Dual injector select on crossfire injection.
Kevin Reynolds
- Snap On Scan Tool
Dave Williams
- MC6803U4 info?
Ludis Langens
- ECM Bench kelp needed
Bruce Plecan
- ECM Bench kelp needed
Marteney, Steven J.
- Timing Jump on 165/TPI System
Mike Rolica
- Hi and just joined this group
Team ZR1
- ECM Bench kelp needed
Marteney, Steven J.
- Hi and just joined this group
Mark Romans
- Snap On Scan Tool
Programmer
- 7747 AC connection.
Kevin Reynolds
- Introduction
Sam Stratton
- Snap On Scan Tool
Marc Piccioni
- Memcals
Geoff Richards
- Memcals
JTesta1966 at aol.com
- Snap On Scan Tool
Programmer
- CR Util
Dave Zug.
- What model ECM is this ?
Mark Romans
- 1227165 89 and Burst knock
Bruce Plecan
- starting point L-plates
Paul Smith
- What model ECM is this ?
Greg Hermann
- Re;Re: What model ECM is this ?
Swayze
- Gummy Chryslers
Programmer
- What model ECM is this ?
Mark Romans
- 1227165 89 and Burst knock
Mark Romans
- 1227165 89 and Burst knock
Mark Romans
- Clues needed
Bruce Plecan
- Clues needed
Mark Romans
- BBC ACFB?
Bruce Plecan
- What model ECM is this ?
Andrew K. Mattei
- Memcals
Andrew K. Mattei
- OFF SUBJECT re: WHAY ECM IS THIS
Swayze
- Clues needed
Greg Hermann
- Clues needed
Greg Hermann
- I'm new...test
ronald.j.selberg at exgate.tek.com
- ECM data logging w/new laptop
James P Hunt
- Memcals
Andrew K. Mattei
- Introduction
ronald.j.selberg at exgate.tek.com
- Gummy Chryslers
Programmer
- Gummy Chryslers
Programmer
- Gummy Chryslers
Greg Hermann
- No subject
Paul Blackmore
- GMECM Digest V2 #20
Paul Blackmore
- bin needed
Shannen Durphey
- Bin recieved...
Shannen Durphey
- High Flow MAF revisited - (Porsche 928 voltage MAF)
Mark Romans
- What model ECM is this ?
Mark Romans
- 730 .ecu file
James P Hunt
- What model ECM is this ?
Mark Romans
- What model ECM is this ?
Mark Romans
- What model ECM is this ?
Chipsbyal at aol.com
- Timing Jump on 165/TPI System
Mark Romans
- 730 .ecu file
James P Hunt
- 730 .ecu file
James P Hunt
- Timing Jump on 165/TPI System
Mark Romans
- 730 .ecu file
Robert W. Hughes
- Fw: 747 programing
Dave Zug
- starting point L-plates
Ross Myers
- starting point L-plates
Mika.Helander at softbit.fi
- 730 .ecu file
James P Hunt
- Red Alert, Bin needed
Bruce Plecan
- 730 .ecu file
James P Hunt
- 730 .ecu file
James P Hunt
- Syncing crossfire injection
Kevin Reynolds
- Gummy Chryslers
Programmer
- Gummy Chryslers
Programmer
- CarBytes V2 now on GM-ECM ftp site
Paul Blackmore
- Gummy Chryslers
Programmer
- MAF conversion revisited
Swayze
- Syncing crossfire injection
Greg Hermann
- .bin file needed..
Walter Sherwin
- Syncing crossfire injection
Greg Hermann
- Anybody want an emulator?
Marc Piccioni
- CarBytes V2 now on GM-ECM ftp site
Paul Blackmore
- Software request
Ch-complat at www.dci.co.ir
- starting point L-plates
Paul Smith
- Red Alert, Bin needed
Programmer
- LT5 Info.., and 1228331 stuff in general.
Bruce Plecan
- Just a little follow up to LT5 posting
Bruce Plecan
- Scantool for '93 4.3L?
Jared Tschetter
- '730 ecu
Programmer
- '730 ecu
Programmer
- Vette serial data and scan tool communications
Shannen Durphey
- VSS question
Mark Romans
- Uploading Stuff To FTP Incoming
Walter Sherwin
- 1228331 (16157364?)
Dave Williams
- Prom burning
JN
- '730 ecu
Programmer
- Prom burning
Programmer
- '730 ecu
Programmer
- LT5 Info.., and 1228331 stuff in general.
Mark Romans
- fuel pump for GM TPI
Vinnie Moscaritolo
- 'Nother pinout needed..
Shannen Durphey
- [ADMIN] Lists are moving!
Orin Eman
- New to the list...
C and T
- fuel pump for GM TPI
Squash
- LT5 Info.., and 1228331 stuff in general.
Squash
- 454SS Truck ".bin" File
Walter Sherwin
- LT5 Info.., and 1228331 stuff in general.
Squash
- Car bytes newbie question
Programmer
- Red Alert, Bin needed
Programmer
- Scantool for '93 4.3L?
Programmer
- 454SS Truck ".bin" File
Programmer
- IAT MAT differences
Bruce Plecan
- Corvette ECM
JN
- 7730v2 ecu file
cwagner at info2000.net
- [ADMIN] test - ignore
Orin
- IAC parameters
Barry Tisdale
- [admin] test 2
John S. Gwynne
- [ADMIN] The Move
Orin
- 454SS Truck ".bin" File
Walter Sherwin
- HOORAY! and bigMaF
Dave Zug
- 7730v3 ecu file
cwagner at info2000.net
- DIS ?????s
Bruce Plecan
- 89 Corvette ECM
JN
- DIS ?????s
Frederic Breitwieser
- CarBytes v2 toolbar problem
Paul Blackmore
- Knock Sensor Tidbit
Ludis Langens
- LT5 Info.., and 1228331 stuff in general.
Mark M. Pikas
- Knock sensor pins
Barry Tisdale
- ftp site
steve ravet
- LT5 Info.., and 1228331 stuff in general.
ECMnut at aol.com
- Disguised scan tool
Shannen Durphey
- Send pics
Mark Huffman
- Send pics
Frederic Breitwieser
- 7170.ecu help
James P Hunt
- Knock sensors
Geoff Richards
- Knock sensors
Bob Valentine
- How do I do a quick test of a 730
Eric Aos
- How do I do a quick test of a 730
Eric Aos
- TGB Adaptation Help?
Rex Weatherford
- LT5 Info.., and 1228331 stuff in general.
Squash
- TB Adaptation Help?
Rex Weatherford
- TGB Adaptation Help?
ronald.j.selberg at exgate.tek.com
- Crossfire SES driver & 7747
Kevin Reynolds
- TPI Vacuum at idle
gabe
- 7170.ecu help
James P Hunt
- 88 quad-4
cwagner at info2000.net
- More user friendly, please..
Shannen Durphey
- Bin Needed
Jeremy Gonyou
- TGB Adaptation Help?
Bja1078 at aol.com
- TPI Vacuum at idle
Bja1078 at aol.com
- 7148 -> 7783 table locs
JTesta1966 at aol.com
- TGB Adaptation Help?
ronald.j.selberg at exgate.tek.com
- 88 quad-4
ECMnut at aol.com
- 88 quad-4
ECMnut at aol.com
- 88 quad-4
ECMnut at aol.com
- [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
Michael Adams
- 88 quad-4
ECMnut at aol.com
- Sorry for Mis-Post Re: Oil
Michael Adams
- Mobil1 vs. Non-Synthetic vs. Red Line?
Greg Hermann
- [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
PAULMARKAD at aol.com
- [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
C and T
- [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
Bob Valentine
- [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
Mark Romans
- 7747 "shaking" the vechile?!
Mika.Helander at softbit.fi
- More user friendly, please..
Ross Myers
- Northstar DIS
Scott Knight
- 88 quad-4
ECMnut at aol.com
- TPI Vacuum at idle
Bruce & Lisa Wilcox
- [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
Mike Rolica
- [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
Mike Rolica
- Fw: Water injection (tech refs)
Bruce Plecan
- Greddy air-fuel ratio meter
Bruce Plecan
- Greddy air-fuel ratio meter
Greg Hermann
- Greddy air-fuel ratio meter
Greg Hermann
- 3.1L turbo vin V schematics uploaded
steve ravet
- Greddy air-fuel ratio meter
Greg Hermann
- 3.1L turbo vin V schematics uploaded
ronald.j.selberg at exgate.tek.com
- 3.1L turbo vin V schematics uploaded
Greg Hermann
- 3.1L turbo vin V schematics uploaded
ronald.j.selberg at exgate.tek.com
- Northstar DIS
Bja1078 at aol.com
- Northstar DIS
Frederic Breitwieser
- No subject
Mike Rolica
- Crossfire mod.. plenum volume or enlarged TBIs first?
Kevin Reynolds
- 88 quad-4
Programmer
- Anyone have a burner, eraser, or eproms they want to sell?
Kevin Reynolds
- Greddy air-fuel ratio meter
C and T
- Northstar DIS
Bja1078 at aol.com
- Northstar DIS
Bja1078 at aol.com
- Disguised scan tool
Bja1078 at aol.com
- Greddy air-fuel ratio meter
Ross Myers
- Public Thanks
Bruce Plecan
- Question from newbie
JN
- Question from newbie
ECMnut at aol.com
- archives
Robert W. Hughes
- Carputing software
Programmer
- Quad 4 .bin file
ronald.j.selberg at exgate.tek.com
- Crossfire mod.. plenum volume or enlarged TBIs first?
Squash
- Archives? [was Greddy air-fuel ratio meter]
Greg Hermann
- Memcals
Pat Ford
- EFI332 Archives
Robert W. Hughes
- Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents)
Roger Heflin
- Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents)
Bob Valentine
- Memcals
Walter Sherwin
- Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents)
Walter Sherwin
- Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents)
Walter Sherwin
- Carputing software
Programmer
- 1227165 Questions
JN
- 1227165 Questions
ECMnut at aol.com
- Any broken ECM's out there?
Michael Davis
- Attn. Richard
ronald.j.selberg at exgate.tek.com
- Any broken ECM's out there?
ECMnut at aol.com
- Tech 1 Questions
Richard Wakeling
- Lost at CSH, HQ
Bruce Plecan
- Northstar DIS
Bja1078 at aol.com
- Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents)
Bja1078 at aol.com
- 727+LT1Conectr.jpg
Shannen Durphey
- Northstar DIS
Bja1078 at aol.com
- Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents)
Bja1078 at aol.com
- Too hot 7805
Bruce Plecan
- Adapting GM ECM to Chrysler Turbo
ECMnut at aol.com
- Confuzin signals
Bruce Plecan
- Confuzin signals
Mika.Helander at softbit.fi
- Too hot 7805
Mika.Helander at softbit.fi
- Too hot 7805
Frederic Breitwieser
- Too hot 7805
Frederic Breitwieser
- Too hot 7805
Don.F.Broadus at ucm.com
- Lost at CSH, HQ
Don.F.Broadus at ucm.com
- Too hot 7805
Sam Stratton
- Adapting GM ECM to Chrysler Turbo
Programmer
- Dribbles, and drabbles yes EFI
Bruce Plecan
- Dribbles, and drabbles yes EFI
Squash
- Dribbles, and drabbles yes EFI
Ward
- High Freq MAF Problem
Scot Sealander
- 7170.ecu help
James P Hunt
- Too hot 7805
Bill Shaw
- Dribbles, and drabbles yes EFI
Dave Williams
- Adapting GM ECM to Chrysler Turbo
Programmer
- Dribbles, and drabbles yes EFI
Squash
- V-Maf Differences for Part #s
Dave Zug.
- Memcals
Dave Williams
- Dribbles, and drabbles yes EFI
Dave Williams
- Memcals
Dave Williams
- DIS ????
Bruce Plecan
- New Member here
olbap
- New Member here
olbap
- V-Maf Differences for Part #s
Mark Romans
- New Member here
olbap
- Questions about chips
FstAssBlzr at aol.com
- Greddy air-fuel ratio meter, really ALDL messages
Dave Hempstead
- DIS ????
Pat Ford
- EFI - Terminology and acronyms
Paul Blackmore
- 2 bar map sensor
steve ravet
- New Member, LT1 Questions
Dave Plummer
Last message date:
Mon Jan 31 23:53:20 GMT 2000
Archived on: Thu May 30 05:44:53 GMT 2013
This archive was generated by
Pipermail 0.09 (Mailman edition).