'730 ecu

[Swayze]

I started with the ecu file you sent me
and have looked at a couple of others
including the promedit ecu file in the
archives. the one you sent me helped to
explain the format of the promedit ecu
file. since then I have been doing lots
of comparisons and just plain looking at
the .bin's. there are some 15 to 19
'maps' in the different '730 .bin's. the
most notable being the 'sharp' spark
map.It kinda stands out from the rest
when viewed. I haven't had a chance to
see what it is yet ( probably some kind
of advance). the 9x9 table in the
promedit ecu has a 4800 rpm max label
value while the one in the winbin goes
up to 5600 rpm.  I will probably hunt
the max value down in the .asm when time
permits( I believe the fuel cut is
pretty well documented in the .asm)
my priority on the diy_efi stuff is
every third sunday from 3am to 5am so I
don't expect to get there very fast.
(slow continuous improvement?)
byE
Mike S.


Programmer wrote:
> 
......
> is pick and find from similarities in other *.ecu maps.
> 
> Which one were you working on ??
> 
> Lyndon.
>