LT5 Info.., and 1228331 stuff in general.

[Tom Sharpe]

I agree with Bruce, when it starts knocking, you are waaaaaaay past peak power.
Most engines with "good" gas and combustion chambers and "normal" advance curves
and compression ratios  won't detonate above 3000 rpm anyway. Trying to cruse at
1800 rpm on '&^%*&' gas is the problem. '*()^*& EPA.  You guys with lotts of
boost, please disregard this message, you have other problems.

The knock sensor IMHO is just a crutch for poor gas. If you tune it on a dyno,
you'll never use it unless you get a load of bad gas.  Tom  (flame suit on)

Bruce Plecan wrote:

> TUNED PROPERLY
> Bruce
>   And Only when you actaully measure the results does any tuning work count.
>   Seat of the pants has gone the way of the carby..
>   The only additional tools you need more then the basic car/dissy days of
> old is
>    a stop watch, and DVM.
>
> | > Most motors do not make best power right before they start knocking.
> | They make the best power when ...............
> | TK
>
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org