Chatting with a 730

Malcolm Robb, LC 0112G Webmaster at lotus-carlton.fsnet.co.uk
Thu Jul 13 11:37:15 GMT 2000


I could be way off base, but it looks to me that the ECU is ignoring your 
f4,56,01,b5 request, and the replies you are seeing are actually just the 
idle chatter of :

0f,5a,00,00,c0,76,78,e9
0f,5a,00,00,c0,76,78,e9
f0,55,bb
0f,5a,00,00,c0,76,78,e9

The third line of this starts with f0, so untill/unless anyone else has any 
better ideas, you might try changing your request to an f0 as well. i.e.

f0,56,01,b9

The parity errors are probably because both the ECU and the PC are 
transmitting at the same time, because the ECU is ignoring your request.

Hope this helps, and that there is a semblance of truth in what I say !
Cheers,
Malcolm Robb, LC 0112G

-----Original Message-----
From:	D. Barry Stubbs [SMTP:z24man at earthlink.net]
Sent:	Thursday, July 13, 2000 7:20 AM
To:	gmecm at diy-efi.org
Subject:	Chatting with a 730

Mr. Mattei has been extremely helpful to me in trying to get working an
interface between my laptop and my 730.  But I don't seem to be having
much luck, and was wondering if anyone could take a look at this:

http://www.geocities.com/z24_man/probe.txt

Its a 14K text file of the output from the EFLive's PROBE program.  I
set it for 99 iterations and logged the results.  Aside from a few
checksum errors (which DO concern me), I am curious if the varied
response length indicated is normal.  It seems to have a pattern to it,
so I'm not too worried, and am assuming that the timeouts and the frame
lengths didn't sync perfectly each time.

What prompted this inquiry with PROBE is that, when attempting to use
ALDLMON (located at http://pweb.de.uu.net/pr-meyer.h/aldl.htm ), I can't
seem to get it to function for me.  The message I continually receive is
"ECM not responding" unless I remove power from the interface, then it
reports "Cable or Interface not present."  So it seems to understand
that there is an interface there.

Any suggestions or ideas?  Could the checksum errors be throwing off
ALDLMON that severely?  Also, is there any other software out there
available now that'll talk to 730s?  Does the 730 need a 10K resistor on
ALDL pins A & B to enter 8192 comm?  As recap/supplementary, this is a
730 with the ADKM prom.

Thanks, in advance, to all.

========================================================================
D. Barry Stubbs                                    http://surf.to/z24man
(912) 745-9429                                     AOL IM: thez24man
z24man at earthlink.net          BNet Member #828     ICQ #5409648
#101DSP MidGa Region SoloII   94 Q4 5spd Aqua Z26  88 2.8 5Spd White Z24
------------------------------------------------------------------------  
----
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org




More information about the Gmecm mailing list