Knock Sensor Question

[Jim Wilson]

Hi Craig,

I had a problem with the sensitivity on my 92LT1. Ended up using a straight
+ 45 degree M/F 1/4 pipe fittings to move away from the block. Now it works
great. The teflon tape and less torque deal did 0 for me. Just remember
before you do any of this make sure you have no audible detonation and the
plugs show no signs of detonation.

                                Jim



-----Original Message-----
From: Craig Marcho <not_valid_email at airmail.net>
To: gmecm at diy-efi.org <gmecm at diy-efi.org>
Date: Thursday, June 22, 2000 1:17 PM
Subject: Knock Sensor Question


Seems I read somewhere you can 'adjust' the sensitivity of the knock sensor
by using teflon tape on the threads, or screwing it in tighter or looser....
can someone verify this and explain how this works? This is for an '85
L98.....
Thanks!
Craig M.


----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org



----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org