testing O2 sensor

[Mike Rolica]

Huluvalot cheaper than my $700 fluke meter :-)
Mike Rolica
Plant A,
Magnesium Products Division
Strathroy

(519)-245-4040  Ext. 265


	-----Original Message-----
	From:	Bruce Plecan [SMTP:nacelp at bright.net]
	Sent:	Friday, June 23, 2000 3:04 AM
	To:	gmecm at diy-efi.org
	Subject:	Re: testing O2 sensor

	Some meters have such a slow sampling rate that the average looks
like no O2
	counts.  Then if trying A/C they can do the RMS (?) thing and again
look
	wrong.  Know your meter, be one with meter, good Karma.  Really best
to use
	scanner, and see O2 Counts or at least a handheld scope (MCM had
them for
	$199).  They have and even better one now that's dual trace for
$299,
	FWIW...
	Grumpy



	> using either a digital VOM set to 2 voltsDC or a scan tool - check
the
	> voltage coming off the sensor to grpund.  Normal is .5volts.  rich
is
	.9volts
	> lean is .1 volts or less.  It will probably swing back and forth
so fast
	you
	> cant get a good reading.
	>
	> Thanks for listening to my electroyappin!
	> Ryan Hampl - a K-State Grad!    kasaryan at aol.com
	> 139 Hoover Ct.                  Controls Engineer (tubes rule!)
	> Salina, KS  67401               97 B12 / 86 V65 / 93chevy truck
EFI 383
	> phone  (785) 825 5831           I'M ALWAYS FIRST TO THE GROCERY
STORE!
	>
--------------------------------------------------------------------------
	--
	> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
quotes)
	> in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
	>

	
----------------------------------------------------------------------------
	To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
quotes)
	in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org