New .bins on ftp site

[Shannen Durphey]

There are new files at the ftp site from Lyndon.  

A base calibration is there, ADTCSTK.bin.  The application is a 1988
5.0L GM TBI truck
with auto 4L60.  The modified .bin description is below.
Shannen

> ADTCCAM.BIN
> 
> This binary was reworked to provide excellent power
> gains and performance over the stock calibration due
> to changes in the following:
> 
> 1. 305 to 355 CID Displacement
> 2. Retained factory TBI Injectors
> 3. Retained factory fuel pressure
> 4. Compression of 9.4 to 1
> 5. Headers with 1-5/8 Primary tubes
> 6. Camshaft 112 L/C overlap 61 degrees
>    Intake duration 209 @ .050
>    Exhaust duration 216 @ .050
>    Intake lift .435
>    Exhaust lift .455
>    Advertised duration 283 int and 286 exh.
> 
> Truck pulls hard from mid to top and could still use some
> bottom end tuning...but this is a good start for anyone.
> Use at your own risk...
>
-------------- next part --------------
An embedded message was scrubbed...
From: "Programmer" <nwester at eidnet.org>
Subject: Re: A:\ADTCCAM.BIN
Date: Wed, 1 Mar 2000 20:26:10 -0700
Size: 3357
URL: <http://lists.diy-efi.org/pipermail/gmecm/attachments/20000301/3e384cab/attachment.mht>