O2 voltage on Diacom

[Roger Heflin]

On Thu, 9 Mar 2000, Marteney, Steven J. wrote:

> Is it common for the O2 voltage to vary radically?  I was suprised to see
> the voltage going from 80mV to 875mV rather rapidly.  It did stabilize but
> tended to bounce.  Is this normal, or the sign of a bad O2 sensor?
> 
> (Never used a Diacom before, so I don't know what to expect.)
> 
> Steve

At idle in closed loop it should bounce between those two numbers.

At wot it should be stable somewhere around 850-950mv.

		Roger

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org