MAP sensors

[nacelp]

Standard Brand Electronics (Long Island, NY), has a suppliment to their main catalog that has a pic reference, might try calling some local parts stores, and see if they have it.
Grumpy
  ----- Original Message ----- 
  From: Mike Swayze 
  To: GMECM 
  Sent: Wednesday, March 15, 2000 1:35 PM
  Subject: MAP sensors


  I have mounted the TPS and IAC to the TB for the the Caddy(Olds) analog fuel injection(still need 1" ID spring 2" long). The TB has a small diameter port that the MAP sensor attaches to. the only MAP sensor I have seen a picture of is the one for TPI (little box looking thing). Near as I can tell the analog setup had the sensor in the ECU box (can't find it on the harness anywhere). Where can I find pictures of the various map sensors? (or are all the GM ones the same?) my concern is to mount it so that I don't get RFI or vibration induced errors. Is the TPI MAP sensor mounted on the manifold(TB) or is it remoted? 

  byE
  Mike (slow as molasses)
  Swayze
  mswayze at truswood.com
  kswayze at bellsouth.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.diy-efi.org/pipermail/gmecm/attachments/20000315/e343aa65/attachment.html>