Contribution to GMECM (AFR Modifier.exe)

[Dave Zug.]

He means if a bit gets flipped for whatever failure reason and the checksum
comes up BAD then the thing will not go into fail operations, it will ignore
the checksum failure.

----- Original Message -----
From: <timsiford at hushmail.com>
To: <gmecm at diy-efi.org>
Sent: Wednesday, November 22, 2000 3:36 PM
Subject: RE: Contribution to GMECM (AFR Modifier.exe)


> David,
>
> I'm sorry.  Could you be more specific?  Can you define "hose the bin" and
> what is 'it'?
>
> Tim
>
> At Wed, 22 Nov 2000 14:35:41 -0500, "David Cooley" <n5xmt at triad.rr.com>
> wrote:
>
> >
> >Bad thing about using $AA is if you hose the bin, it won't do a checksum
> >on
> >it and it just won't run...
> >
> >
> >> -----Original Message-----
> >> From: owner-gmecm at diy-efi.org [mailto:owner-gmecm at diy-efi.org]On Behalf
> >> Of timsiford at hushmail.com
> >> Sent: Wednesday, November 22, 2000 1:45 PM
> >> To: gmecm at diy-efi.org
> >> Subject: Re: Contribution to GMECM (AFR Modifier.exe)
> >>
> >>
> >> >There is no mask $AA.  Or - most any mask can be changed to $AA.
> > $AA
> >> >means experimental mode, which means that the ECM doesn't check the
> >> >PROM sumcheck.
> >>
> >> Thanks for the Sumcheck info Ludis!  Appreciate it.  I am adding the
> >$AA
> >> specifically for those wishing to view experimental bins (thanks Bob).
> >>
> >> Tim
> >>
> >>
> >> >
> >> >--
> >> >Ludis Langens                               ludis (at) cruzers (dot)
> >> >com
> >> >Mac, Fiero, & engine controller goodies:
http://www.cruzers.com/~ludis/
> >> >
> >> >
> >> >-----------------------------------------------------------------
> >---
> >> >--------
> >> >To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
> >quotes)
> >> >in the body of a message (not the subject) to majordomo at lists.diy-
> >efi.org
> >> >
> >
> >--------------------------------------------------------------------
> >--------
> >To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> >in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> >

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org