November 2000 Archives by author
Starting: Wed Nov 1 01:01:13 GMT 2000
Ending: Thu Nov 30 23:19:33 GMT 2000
Messages: 1209
- WinBin vs PromEdit - problem with "mulOrDivOrBit"
Eric Aos
- WinBin vs PromEdit - problem with "mulOrDivOrBit"
Eric Aos
- Call for standards: EPROM/cal editing software
Eric Aos
- Another WinBin question
Eric Aos
- Call for standards: EPROM/cal editing
Eric Aos
- WinBin Version Next...
Eric Aos
- WinBin Version Next...
Eric Aos
- Viruses
Eric Aos
- Ecm role expanding?
Eric Aos
- '749 Promgrammer updates
Robert Bianchi
- Call for standards: EPROM/cal editing software
Paul Blackmore
- Call for standards: EPROM/cal editing software
Paul Blackmore
- V6 ALDL Communications
Paul Blackmore
- eprom for 747
Alain Blais
- 10 LED O2 monitor
Mathieu Blais
- general info
Mathieu Blais
- off-list Re: general info
Mathieu Blais
- 10 LED O2 monitor
Mathieu Blais
- beginner question
Mathieu Blais
- MEFI installation pictures
Mathieu Blais
- eprom for 747
Mathieu Blais
- eprom for 747
Mathieu Blais
- Winbin problems
Mathieu Blais
- LS1 - Flash - Reprogramming
Bob
- Miniram Tip in Problem
Bob
- News Release - Maybe this will make life a little easier
Bob
- 165 knock sensor sensitivity
Bob
- Miniram Backfire Update II
Bob
- Contribution to GMECM (AFR Modifier.exe)
Bob
- 730 ECM Swap
Bob
- Scope pics...
Matt S Bower
- Scope pics...
Matt S Bower
- Diesel EFI
Matt S Bower
- Call for standards: EPROM/cal editing
Warren Bowley
- Call for standards: EPROM/cal editing software
Warren Bowley
- No subject
Warren Bowley
- DIY EGOR
Warren Bowley
- O2 sensors
Warren Bowley
- argh.
Warren Bowley
- DIY EGOR
Warren Bowley
- TBI idle problem
Brent
- TBI idle problem
Brent
- PROM Size on a 165
Brent
- Scope pics...
Eric Bryant
- 10 LED O2 monitor
Eric Bryant
- head gaskets
Eric Bryant
- Auto Power Environment
Eric Bryant
- Auto Power Environment
Eric Bryant
- drive by wire and 42V
Eric Bryant
- Ecm role expanding?
Eric Bryant
- drive by wire and 42V
Eric Bryant
- drive by wire and 42V
Eric Bryant
- Ecm role expanding?
Eric Bryant
- Distributorless ignition (I'm new around here)
Eric Bryant
- Ecm role expanding?
Eric Bryant
- Ecm role expanding?
Eric Bryant
- Ecm role expanding?
Eric Bryant
- Backfire
Todd Burkard
- Part number for heated o2
Todd Burkard
- 89 MANUAL BIN
Todd Burkard
- 730 ECM Swap
Todd Burkard
- Injector question
Todd Burkard
- Message formatting
Don Burns
- GMECM Digest V2 #644
Don Burns
- Laptops
Jay Carter
- Halloween HEX Patches
Steven Ciciora
- Analog meters
Steven Ciciora
- Call for standards: EPROM/cal editing software
Daniel Collins
- History & $5D Calibration Information?
Daniel Collins
- Call for standards: EPROM/cal editing
Daniel Collins
- History & $5D Calibration Information?
Daniel Collins
- Fuel rail vaporization
Daniel Collins
- WinBin Version Next...
Daniel Collins
- 1227808 - Which cars?
Daniel Collins
- Distributorless ignition (I'm new around here)
Daniel Collins
- When is a heated 02 sensor necessary ?
David Cooley
- New Prom
David Cooley
- Bad oxygen sensor ?
David Cooley
- Bad oxygen sensor ?
David Cooley
- J N's MiniRam backfire
David Cooley
- J N's MiniRam backfire
David Cooley
- Viruses
David Cooley
- Scope pics...
David Cooley
- Scope pics...
David Cooley
- Scope pics...
David Cooley
- 10 LED O2 monitor
David Cooley
- Scope pics...
David Cooley
- ABS ALDL comms
David Cooley
- Any message packrats out there?
David Cooley
- OBDI and OBDII Scanners?
David Cooley
- Contribution to GMECM (AFR Modifier.exe)
David Cooley
- 1994 Truck ECM ??
David Cooley
- 1994 Truck ECM ??
David Cooley
- Bruce's Car of the Month...
Jim Cottrill
- New Prom
Kevin Crain
- PROM Size on a 165
Michael Davis
- Fuel rail vaporization
Rod Davis
- 730 ECM Swap
Zacek DenniS
- help! prbs bldg ALDL interface
Eric Deslauriers
- 88 Police 350 specs
Eric Deslauriers
- 88 Police 350 specs
Eric Deslauriers
- '749 Promgrammer updates
Dig
- Call for standards: EPROM/cal editing software
Dig
- Call for standards: EPROM/cal editing
Dig
- GMECM Digest V2 #589
Dig
- Call for standards: EPROM/cal editing
Dig
- Missing guy
Dig
- Call for standards: EPROM/cal editing
Dig
- Call for standards: EPROM/cal editing
Dig
- Open A/D lines onna '148?
Dig
- BinEditor Standard Configs?
Dig
- Watch for new round of virii!!!
Shannen Durphey
- Any message packrats out there?
Shannen Durphey
- 730 ECM Swap
Shannen Durphey
- 730 ECM Swap
Shannen Durphey
- Just got my TPI running...questions...
Shannen Durphey
- Just got my TPI running...questions...
Shannen Durphey
- 165 knock sensor sensitivity
Shannen Durphey
- 730 ECM Swap
Shannen Durphey
- DIS Ditty
Shannen Durphey
- Diesel EFI
Shannen Durphey
- MEFI installation pictures
Shannen Durphey
- MEFI installation pictures
Shannen Durphey
- MEFI installation pictures
Shannen Durphey
- Is this the right place?
Shannen Durphey
- What are BCCs, mask ids
Shannen Durphey
- Shannen, newest digests coming first...
Shannen Durphey
- Any message packrats out there?
Shannen Durphey
- Message Packrats
Shannen Durphey
- New bin on incoming
Shannen Durphey
- Mind Control
Shannen Durphey
- $32 - '165 ecu file ?
Shannen Durphey
- Ecm role expanding?
Shannen Durphey
- All set with digests
Shannen Durphey
- 7747 related questions
Shannen Durphey
- 7747 related questions
Shannen Durphey
- drive by wire and 42V
Shannen Durphey
- Off: GM_Ecm role expanding into ABS?
Shannen Durphey
- Ecm role expanding?
Shannen Durphey
- Distributorless ignition (I'm new around here)
Shannen Durphey
- Anyone working with this one?
Shannen Durphey
- head gaskets
John_Calabrese at ENGELHARD.COM
- Auto Power Environment
John_Calabrese at ENGELHARD.COM
- When is a heated 02 sensor necessary ?
Edmond
- When is a heated 02 sensor necessary ?
Edmond
- Any Advice on Shorty Plugs?
Edmond
- When is a heated 02 sensor necessary ?
Edmond
- Question about BLMs
Edmond
- Bad oxygen sensor ?
Edmond
- Bad oxygen sensor ?
Edmond
- Bad oxygen sensor ?
Edmond
- Bad oxygen sensor ?
Edmond
- Bad oxygen sensor ?
Edmond
- Viruses
Edmond
- Timing jump at idle
Edmond
- Question about WOT table in $8D bin
Edmond
- Question about WOT table in $8D bin
Edmond
- Question about WOT table in $8D bin
Edmond
- Driver board group buy closed.
Dave & Irina Eicher
- LS1 - Flash - Reprogramming
Dave & Irina Eicher
- looking for afdz and/or albk bins
Pat Ford
- '747 + 6 Cyl + Turbo?
Shane Forster
- '747 + 6 Cyl + Turbo?
Shane Forster
- Help 730
DALE GROAH
- Reading Plugs
DALE GROAH
- 730 ECM Swap
Gabe
- PROM Size on a 165
Gabe
- PROM Size on a 165
Gabe
- PROM Size on a 165
Gabe
- Contribution to GMECM (AFR Modifier.exe)
Gabe
- WinBin vs PromEdit - problem with "mulOrDivOrBit"
Peter Gargano
- Call for standards: EPROM/cal editing software
Peter Gargano
- 88-89 Turbo PFI 1.5L Isuzu
Peter Gargano
- $5D .ecu file (1227808 MAP, 4/6/8)
Peter Gargano
- Call for standards: EPROM/cal editing software
Peter Gargano
- History & $5D Calibration Information?
Peter Gargano
- History & $5D Calibration Information?
Peter Gargano
- History & $5D Calibration Information?
Peter Gargano
- History & $5D Calibration Information?
Peter Gargano
- Edge board scanners
Peter Gargano
- Edge board scanners
Peter Gargano
- mask 88h hac'd
Peter Gargano
- Australian 1227808 ECU data for .ecu file
Peter Gargano
- Australian 1227808 ECU data for .ecu file
Peter Gargano
- Message formatting
Peter Gargano
- Message formatting
Peter Gargano
- connector pins -- was Re: 730 ECM Swap
Peter Gargano
- MemCals Needing a Good Home...
Peter Gargano
- Viruses
Peter Gargano
- Looking for a website
Peter Gargano
- Scope pics...
Peter Gargano
- Proms bigger than 64K
Peter Gargano
- 10 LED O2 monitor
Peter Gargano
- 165 to 730 Harness - Final Info
Peter Gargano
- PROM Size on a 165
Peter Gargano
- PROM Size on a 165
Peter Gargano
- Schematic for 1227730 ECM
Peter Gargano
- 1227808 - Which cars?
Peter Gargano
- BNBH.BIN Needed
Peter Gargano
- PWMs... What are they?
Peter Gargano
- Missing guy
Jeremy Gonyou
- V6 ALDL Communications
Jeremy Gonyou
- V6 ALDL Communications
Jeremy Gonyou
- Ecm role expanding?
Jeremy Gonyou
- Ecm role expanding?
Jeremy Gonyou
- Injector Size on Chevy 3.1 V6
Jeremy Gonyou
- Ecm role expanding?
Jeremy Gonyou
- AYSZ bin
Jeremy Gonyou
- Distributorless ignition (I'm new around here)
Guenther, Max [ASCO/PA]
- ALDL stream recycle time
John S. Gwynne
- Message formatting
Roger Heflin
- Viruses
Roger Heflin
- Viruses
Roger Heflin
- 730 ECM Swap
Rob Higgins
- Diesel EFI
Rob Higgins
- Meter testing for ecm work
Robert W. Hughes
- shipping addresses for driver board group buy
David Rhoads II
- DIY_EFI Digest V5 #369
David Rhoads II
- Driver board shipping addresses
David Rhoads II
- I'm ready for Combo Driver payments
David Rhoads II
- I'm ready for Combo Driver payments - webpage
David Rhoads II
- Western union location for Driver brd International pymts
David Rhoads II
- WinBin vs PromEdit - problem with "mulOrDivOrBit"
Carl Ijames
- Another WinBin question
Carl Ijames
- Edge board scanners
Carl Ijames
- Message formatting
Carl Ijames
- 1227148 ecu uploaded
Carl Ijames
- J N's MiniRam backfire
Carl Ijames
- check sum calculator
Carl Ijames
- DIS Ditty
Carl Ijames
- Miniram Tip in Problem
JN
- Miniram Tip in Problem
JN
- Miniram Tip in Problem
JN
- 730 ECM Swap
JN
- 730 ECM Swap
JN
- Call for standards: EPROM/cal editing
JN
- Big Injectors in Little Engine?
JN
- 89 MANUAL BIN
JN
- J N's MiniRam backfire
JN
- J N's MiniRam backfire
JN
- J N's MiniRam backfire
JN
- J N's MiniRam backfire
JN
- J N's MiniRam backfire
JN
- J N's MiniRam backfire
JN
- J N's MiniRam backfire
JN
- J N's MiniRam backfire
JN
- JN's Minram Backfire UPDATE!
JN
- Miniram Backfire Update II
JN
- Miniram Backfire Update II
JN
- 89 $6E Code Question
JN
- Fw: Miniram Backfire Update II
JN
- Miniram Backfire Update II
JN
- Question about WOT table in $8D bin
JN
- Pump Shot table Question $6E
JN
- Pump Shot table Question $6E
JN
- Contribution to GMECM (AFR Modifier.exe)
JN
- Ecm role expanding?
JN
- Need a 7165 ECM
JN
- Need a 7165 ECM
JN
- Need a 7165 ECM
JN
- Need a 7165 ECM
JN
- Emulator gone bonkers
Keith
- Emulator gone bonkers
Keith
- Emulator gone bonkers
Keith
- Emulator gone bonkers
Keith
- Elementary assembly lang question...
Dale Klein
- ABS ALDL comms
Dale Klein
- Is this the right place?
Jake Kooser
- Some basic questions
Jake Kooser
- Ecm role expanding?
Jake Kooser
- Call for standards: EPROM/cal editing software
Ludis Langens
- E vs M ALDL pins
Ludis Langens
- Australian 1227808 ECU data for .ecu file
Ludis Langens
- S19 vs S9
Ludis Langens
- Elementary assembly lang question...
Ludis Langens
- New Prom
Ludis Langens
- 90 TPI computer and wiring setup question???
Ludis Langens
- Call for standards: EPROM/cal editing software
Ludis Langens
- Edge board scanners
Ludis Langens
- Newbie help
Ludis Langens
- Message formatting
Ludis Langens
- WooHoo new 730 ECM
Ludis Langens
- what is an "emulator"?
Ludis Langens
- AFR calc from Diacom data... was RE: Adding another O2 sensor
Ludis Langens
- MemCals Needing a Good Home...
Ludis Langens
- MemCals Needing RFD Tweeking Before Finding A Home......
Ludis Langens
- MemCals Needing RFD Tweeking Before Finding A Home......
Ludis Langens
- 730 ECM Swap
Ludis Langens
- looking for afdz and/or albk bins
Ludis Langens
- 10 LED O2 monitor
Ludis Langens
- PROM Size on a 165
Ludis Langens
- Schematic for 1227730 ECM
Ludis Langens
- Too many BCCs, too few mask ids
Ludis Langens
- Too many BCCs, too few mask ids
Ludis Langens
- Meter testing for ecm work
Ludis Langens
- Contribution to GMECM (AFR Modifier.exe)
Ludis Langens
- New bin on incoming
Ludis Langens
- eprom for 747
Ludis Langens
- 1994 Truck ECM ??
Ludis Langens
- Auto Power Environment
Ludis Langens
- Compilers (human) needed
Ludis Langens
- 7747 related questions
Ludis Langens
- PWMs... What are they?
Ludis Langens
- eprom for 747
Ludis Langens
- Anyone working with this one?
Ludis Langens
- Transez. was:New bin...
Ludis Langens
- AYSZ bin
Ludis Langens
- Part number for heated o2
Shawn Lin
- AYSZ bin
Shawn Lin
- PROM Size on a 165
Mitch Louole
- PROM Size on a 165
Mitch Louole
- what is an "emulator"?
Jeff M
- PROM Size on a 165
Craig Marcho
- PROM Size on a 165
Craig Marcho
- Any message packrats out there?
Craig Marcho
- Gas mileage saga continues (Sorry, QUITE LONG)
Marteney, Steven J.
- When is a heated 02 sensor necessary ?
Marteney, Steven J.
- 730 ECM Swap
Marteney, Steven J.
- Adding another O2 sensor
Marteney, Steven J.
- 730 ECM Swap
Marteney, Steven J.
- When is a heated 02 sensor necessary ?
Marteney, Steven J.
- Adding another O2 sensor
Marteney, Steven J.
- AFR calc from Diacom data... was RE: Adding another O2 sensor
Marteney, Steven J.
- 730 ECM Swap
Marteney, Steven J.
- O2 sensors
Marteney, Steven J.
- O2 sensors
Marteney, Steven J.
- AFR calc from Diacom data... was RE: Adding another O2 sensor
Marteney, Steven J.
- AFR calc from Diacom data... was RE: Adding another O2 sensor
Marteney, Steven J.
- E vs M ALDL pins
Marteney, Steven J.
- O2 sensors
Marteney, Steven J.
- 730 ECM Swap
Marteney, Steven J.
- AFR calc from Diacom data... was RE: Adding another O2 sensor
Marteney, Steven J.
- 89 165 TPI hack?
Marteney, Steven J.
- Some questions on DIY EGOR schematics
Marteney, Steven J.
- Auto Power Environment
Marteney, Steven J.
- Some questions on DIY EGOR schematics
Marteney, Steven J.
- Ecm role expanding?
Marteney, Steven J.
- eprom for 747
Marteney, Steven J.
- Ecm role expanding?
Marteney, Steven J.
- Transez. was:New bin...
Marteney, Steven J.
- Ecm role expanding?
Marteney, Steven J.
- PWMs, 3FXXs and personal opinions.
Marteney, Steven J.
- ENTIRECATALOG.pdf
John Martin
- No subject
Mike Martone
- C4 (vette) dash
Mike Martone
- 10 LED O2 monitor
Mike Martone
- 10 LED O2 monitor
Mike Martone
- LS1 - Flash - Reprogramming
Andrew Mattei
- DIS Ditty
Andrew Mattei
- LS1 - Flash - Reprogramming
Andrew K. Mattei
- Part number for heated o2
Andrew K. Mattei
- DIY EGOR plans
Andrew K. Mattei
- Auto Power Environment
Andrew K. Mattei
- 730 ECM Swap
Thomas Matthews
- Australian 1227808 ECU data for .ecu file
Roger Merritt
- 1227808 - Which cars?
Roger Merritt
- HUD?
Mike
- c't flasher
Mike
- Big Injectors in Little Engine?
Craig Moates
- Big Injectors in Little Engine?
Craig Moates
- FYI: Fw: Modifying TDF files?
Craig Moates
- WooHoo new 730 ECM
Patrick G. Moore
- Fuel Injector list?
Patrick G. Moore
- Call for standards: EPROM/cal editing software
Ross Myers
- Call for standards: EPROM/cal editing
Ross Myers
- DIY EGOR
Ross Myers
- Measuring Altitude
Ross Myers
- what is an "emulator"?
Ross Myers
- Aftermarket ROMs
Ross Myers
- New bin on incoming
Ross Myers
- New bin on incoming
Ross Myers
- 7747 related questions
Ross Myers
- Any Advice on Shorty Plugs?
NRG
- WinBin Version Next...
NRG
- Question about WOT table in $8D bin
NRG
- Just got my TPI running...questions...
NRG
- Question about WOT table in $8D bin
NRG
- Just got my TPI running...questions...
NRG
- Contribution to GMECM (AFR Modifier.exe)
NRG
- Quick question
NRG
- Question about WOT table in $8D bin
NRGZ28
- Crane AFPR
NRGZ28
- Crane AFPR
NRGZ28
- Question about WOT table in $8D bin
NRGZ28
- Question about...
NRGZ28
- Question about...
NRGZ28
- Question about WOT table in $8D bin
NRGZ28
- Question about WOT table in $8D bin
NRGZ28
- Question about WOT table in $8D bin
NRGZ28
- Question about WOT table in $8D bin
NRGZ28
- Question about WOT table in $8D bin
NRGZ28
- Question about WOT table in $8D bin
NRGZ28
- DIY EGOR plans
NickG
- Injector help...
NickG
- DIY EGOR sensor app
NickG
- c't flasher
Brent Obermiller
- [ADMIN] Expectations of privacy
Orin
- Big Injectors in Little Engine?
Chris P.
- Big Injectors in Little Engine?
Chris P.
- non-programmer ??'s
Chris P.
- non-programmer ??'s
Chris P.
- WinBin vs PromEdit - problem with "mulOrDivOrBit"
David Papworth
- MemCals Needing a Good Home...
David Papworth
- Help for Newbies on Spark Timing
David Papworth
- grams/cfm ?
David Papworth
- Distributorless ignition (I'm new around here)
Frank F Parker
- Scope pics...
Gerald Pelnar
- Scope pics...
Gerald Pelnar
- Scope pics...
Gerald Pelnar
- 10 LED O2 monitor
Aron Lopes Petrucci
- base / advance timing - TBI/TPI with distributor
Marc Piccioni
- Auto Power Environment
Marc Piccioni
- '747 + 6 Cyl + Turbo?
Bruce Plecan
- When is a heated 02 sensor necessary ?
Bruce Plecan
- Any Advice on Shorty Plugs?
Bruce Plecan
- Tuning 101
Bruce Plecan
- Adding another O2 sensor
Bruce Plecan
- REALLY basic newbie ?'s
Bruce Plecan
- EGOR future... The Original EGOR and the commercial version
Bruce Plecan
- Call for standards: EPROM/cal editing software
Bruce Plecan
- Adding another O2 sensor
Bruce Plecan
- The Original DIY EGOR
Bruce Plecan
- Call for standards: EPROM/cal editing software
Bruce Plecan
- Backfire
Bruce Plecan
- LS1 - Flash - Reprogramming
Bruce Plecan
- Missing guy
Bruce Plecan
- MEFI 3.0
Bruce Plecan
- Call for standards: EPROM/cal editing
Bruce Plecan
- When is a heated 02 sensor necessary ?
Bruce Plecan
- Adding another O2 sensor
Bruce Plecan
- Adding another O2 sensor
Bruce Plecan
- History & $5D Calibration Information?
Bruce Plecan
- Engine Analyser
Bruce Plecan
- Part number for heated o2
Bruce Plecan
- Big Injectors in Little Engine?
Bruce Plecan
- Big Injectors in Little Engine?
Bruce Plecan
- History & $5D Calibration Information?
Bruce Plecan
- Big Injectors in Little Engine?
Bruce Plecan
- Edge board scanners
Bruce Plecan
- 90 TPI computer and wiring setup question???
Bruce Plecan
- 90 TPI computer and wiring setup question???
Bruce Plecan
- manual IAC differences.
Bruce Plecan
- News Release - Maybe this will make life a little easier
Bruce Plecan
- Call for standards: EPROM/cal editing
Bruce Plecan
- Question about BLMs
Bruce Plecan
- Fuel rail vaporization
Bruce Plecan
- 90 TPI computer and wiring setup question???
Bruce Plecan
- Call for standards: EPROM/cal editing
Bruce Plecan
- Call for standards: EPROM/cal editing
Bruce Plecan
- Call for standards: EPROM/cal editing
Bruce Plecan
- Message formatting
Bruce Plecan
- Message formatting
Bruce Plecan
- 730 ECM Swap
Bruce Plecan
- 730 ECM Swap
Bruce Plecan
- 730 ECM Swap
Bruce Plecan
- 730 ECM Swap
Bruce Plecan
- Big Injectors in Little Engine?
Bruce Plecan
- 730 ECM Swap
Bruce Plecan
- O2 sensors
Bruce Plecan
- what is an "emulator"?
Bruce Plecan
- O2 sensors
Bruce Plecan
- 730 ECM Swap
Bruce Plecan
- 730 ECM Swap
Bruce Plecan
- DIY EGOR
Bruce Plecan
- DIY EGOR
Bruce Plecan
- DIY EGOR
Bruce Plecan
- DIY EGOR
Bruce Plecan
- DIY EGOR
Bruce Plecan
- 10 LED O2 monitor
Bruce Plecan
- 10 LED O2 monitor
Bruce Plecan
- 10 LED O2 monitor
Bruce Plecan
- DIY EGOR
Bruce Plecan
- DIY EGOR
Bruce Plecan
- 89 MANUAL BIN
Bruce Plecan
- AFR calc from Diacom data... was RE: Adding another O2 sensor
Bruce Plecan
- Bad oxygen sensor ?
Bruce Plecan
- Bad oxygen sensor ?
Bruce Plecan
- Bad oxygen sensor ?
Bruce Plecan
- Bad oxygen sensor ?
Bruce Plecan
- Bad oxygen sensor ?
Bruce Plecan
- MemCals Needing a Good Home...
Bruce Plecan
-
Bruce Plecan
- J N's MiniRam backfire
Bruce Plecan
- J N's MiniRam backfire
Bruce Plecan
- J N's MiniRam backfire
Bruce Plecan
- Viruses
Bruce Plecan
- J N's MiniRam backfire
Bruce Plecan
- Viruses
Bruce Plecan
- Viruses
Bruce Plecan
- XFire Bin
Bruce Plecan
- Viruses
Bruce Plecan
- MemCals Needing RFD Tweeking Before Finding A Home......
Bruce Plecan
- XFire Bin CSH, HQ Special
Bruce Plecan
- head gaskets
Bruce Plecan
- head gaskets N notes about such
Bruce Plecan
- Timing jump at idle
Bruce Plecan
- Fw: Scope pics...
Bruce Plecan
- scope
Bruce Plecan
- 165 knock sensor sensitivity
Bruce Plecan
- Just got my TPI running. Diagnostics
Bruce Plecan
- heads are back on - made some runs and tuning
Bruce Plecan
- 730 ECM Swap
Bruce Plecan
- Just got my TPI running...questions...
Bruce Plecan
- Scope pics...
Bruce Plecan
- Scope pics...
Bruce Plecan
- DIS Ditty
Bruce Plecan
- DIS Ditty
Bruce Plecan
- Scope pics...
Bruce Plecan
- 165 knock sensor sensitivity
Bruce Plecan
- DIS Ditty
Bruce Plecan
- Miniram Backfire Update II
Bruce Plecan
- Scope pics...
Bruce Plecan
- Scope pics...
Bruce Plecan
- DIY EGOR
Bruce Plecan
- head gaskets
Bruce Plecan
- DIS Ditty
Bruce Plecan
- 10 LED O2 monitor
Bruce Plecan
- 10 LED O2 monitor
Bruce Plecan
- DIS Ditty
Bruce Plecan
- Hypertech carrier
Bruce Plecan
- 10 LED O2 monitor
Bruce Plecan
- Hypertech carrier
Bruce Plecan
- Hypertech carrier
Bruce Plecan
- 730 ECM Swap - UPDATE
Bruce Plecan
- 89 $6E Code Question
Bruce Plecan
- Question about WOT table in $8D bin
Bruce Plecan
- Question about WOT table in $8D bin
Bruce Plecan
- Question about WOT table in $8D bin
Bruce Plecan
- 89 $6E Code Question
Bruce Plecan
- Question about WOT table in $8D bin
Bruce Plecan
- Question about...
Bruce Plecan
- More DIY EGOR
Bruce Plecan
- Western union location for Driver brd International pymts
Bruce Plecan
- Question about...
Bruce Plecan
- Question about...
Bruce Plecan
- PROM Size on a 165
Bruce Plecan
- Question about...
Bruce Plecan
- Question about...
Bruce Plecan
- beginner question
Bruce Plecan
- PROM Size on a 165
Bruce Plecan
- Question about WOT table in $8D bin
Bruce Plecan
- Question about WOT table in $8D bin
Bruce Plecan
- Question about WOT table in $8D bin
Bruce Plecan
- Meter testing for ecm work
Bruce Plecan
- Question about WOT table in $8D bin
Bruce Plecan
- Question about WOT table in $8D bin
Bruce Plecan
- Question about WOT table in $8D bin
Bruce Plecan
- GMECM Digest V2 #644
Bruce Plecan
- Quick question
Bruce Plecan
- Shannen, newest digests coming first...
Bruce Plecan
- Shannen, newest digests coming first...
Bruce Plecan
- IAC base count question.
Bruce Plecan
- 7747 idle smoothing.
Bruce Plecan
- Any message packrats out there?
Bruce Plecan
- Some questions on DIY EGOR schematics
Bruce Plecan
- Contribution to GMECM (AFR Modifier.exe)
Bruce Plecan
- Thanksgiving
Bruce Plecan
- Contribution to GMECM (AFR Modifier.exe)
Bruce Plecan
- Fw: Knock Sensor
Bruce Plecan
- eprom for 747
Bruce Plecan
- $32 - '165 ecu file ?
Bruce Plecan
- $32 - '165 ecu file ?(LT1/LS1 twist)
Bruce Plecan
- BinEditor Standard Configs?
Bruce Plecan
- eprom for 747
Bruce Plecan
- eprom for 747
Bruce Plecan
- $32 - '165 ecu file ?
Bruce Plecan
- BinEditor Standard Configs?
Bruce Plecan
- BinEditor Standard Configs?
Bruce Plecan
- Ecm role expanding?
Bruce Plecan
- Ecm role expanding?
Bruce Plecan
- Ecm role expanding?
Bruce Plecan
- Ecm role expanding?
Bruce Plecan
- Distributorless ignition (I'm new around here)
Bruce Plecan
- Distributorless ignition (I'm new around here)
Bruce Plecan
- Distributorless ignition (I'm new around here)
Bruce Plecan
- Ecm role expanding?
Bruce Plecan
- Distributorless ignition (I'm new around here)
Bruce Plecan
- PWMs... What are they?
Bruce Plecan
- Anyone working with this one?
Bruce Plecan
- Fw: PWMs... What are they?
Bruce Plecan
- Fw: Fw: PWMs... What are they?
Bruce Plecan
- The Honda O2 sensor. Wide band module.
Bruce Plecan
- Need a 7165 ECM
Bruce Plecan
- Fw: [ADMIN] Expectations of privacy
Bruce Plecan
- LT1 ECU
Dave Plummer
- Halloween HEX Patches
Programmer
- Missing guy
Programmer
- Missing guy
Programmer
- Missing guy
Programmer
- WinBin vs PromEdit - problem with "mulOrDivOrBit"
Programmer
- Call for standards: EPROM/cal editing software
Programmer
- Tuning 101
Programmer
- LS1 - Flash - Reprogramming
Programmer
- Missing guy
Programmer
- Call for standards: EPROM/cal editing
Programmer
- Call for standards: EPROM/cal editing
Programmer
- New Prom
Programmer
- mask 88h hac'd
Programmer
- TBI idle problem
Programmer
- Fuel rail vaporization
Programmer
- Call for standards: EPROM/cal editing
Programmer
- Call for standards: EPROM/cal editing
Programmer
- Call for standards: EPROM/cal editing
Programmer
- 89 '165 Ecu for Winbin - Come and get it
Programmer
- Call for standards: EPROM/cal editing
Programmer
- 165 ECU File
Programmer
- 89 '165 Ecu for Winbin - Come and get it
Programmer
- 165 ECU File
Programmer
- Call for standards: EPROM/cal editing
Programmer
- Call for standards: EPROM/cal editing
Programmer
- 89 '165 Ecu for Winbin - Come and get it
Programmer
- Bad oxygen sensor ?
Programmer
- 1227148 ecu ??
Programmer
- 1227148 ecu uploaded
Programmer
- WinBin Version Next...
Programmer
- Viruses
Programmer
- Viruses
Programmer
- J N's MiniRam backfire
Programmer
- head gaskets
Programmer
- 165 knock sensor sensitivity
Programmer
- Question about WOT table in $8D bin
Programmer
- 730 ECM Swap
Programmer
- head gaskets
Programmer
- Low power 5.0 TPI
Programmer
- head gaskets
Programmer
- base / advance timing - TBI/TPI with distributor
Programmer
- head gaskets
Programmer
- Diesel EFI
Programmer
- Diesel EFI
Programmer
- Too many BCCs, too few mask ids
Programmer
- Quick question
Programmer
- Contribution to GMECM (AFR Modifier.exe)
Programmer
- Thanksgiving
Programmer
- New bin on incoming
Programmer
- Transez. was:New bin...
Programmer
- $32 - '165 ecu file ?
Programmer
- $32 - '165 ecu file ?
Programmer
- $32 - '165 ecu file ?
Programmer
- grams/cfm ?
Programmer
- grams/cfm ?
Programmer
- grams/cfm ?
Programmer
- BinEditor Standard Configs?
Programmer
- BinEditor Standard Configs?
Programmer
- $32 - '165 ecu file ?
Programmer
- 1994 Truck ECM ??
Programmer
- 1994 Truck ECM ??
Programmer
- Compilers (human) needed
Programmer
- Winbin problems
Programmer
- AYSZ bin
Programmer
- Fw: Miniram Tip in Problem
Kevin R
- manual IAC differences.
Kevin R
- DIY EGOR
Kevin R
- Viruses
Kevin R
- XFire Bin
Kevin R
- check sum calculator
Kevin R
- IAC base count question.
Kevin R
- 7747 timing question.
Kevin R
- 7747 idle smoothing.
Kevin R
- Ecm role expanding?
Kevin R
- eprom for 747
Kevin R
- C4 (vette) dash
Red86
- AYSZ bin
Phil Rickard
- 730 j-body communication
Mike Rolica
- DIY EGOR
Mike Rolica
- my 355/ 730ecm truck
Mike Rolica
- Question about...
Mike Rolica
- 730 ECM Swap
Romans, Mark
- 730 ECM Swap
Romans, Mark
- MEFI 3.0
Romans, Mark
- 730 ECM Swap
Romans, Mark
- AFR calc from Diacom data... was RE: Adding another O2 sensor
Romans, Mark
- AFR calc from Diacom data... was RE: Adding another O2 sensor
Romans, Mark
- 10 LED O2 monitor
Romans, Mark
- 10 LED O2 monitor
Romans, Mark
- Bad oxygen sensor ?
Romans, Mark
- Bad oxygen sensor ?
Romans, Mark
- Bad oxygen sensor ?
Romans, Mark
- Quick - ECM app help
Romans, Mark
- 165 knock sensor sensitivity
Romans, Mark
- Question about WOT table in $8D bin
Romans, Mark
- my 355/ 730ecm truck
Romans, Mark
- More WOT AFR stuff
Romans, Mark
- PROM Size on a 165
Romans, Mark
- Question about WOT table in $8D bin
Romans, Mark
- PROM Size on a 165
Romans, Mark
- Question about WOT table in $8D bin
Romans, Mark
- Question about WOT table in $8D bin
Romans, Mark
- Question about WOT table in $8D bin
Romans, Mark
- Pump Shot table Question $6E
Romans, Mark
- Transez. was:New bin...
Romans, Mark
- Transez. was:New bin...
Romans, Mark
- $32 - '165 ecu file ?
Romans, Mark
- $32 - '165 ecu file ?
Romans, Mark
- Transez. was:New bin...
Romans, Mark
- Quick update of AFRModifier
Romans, Mark
- : Re: LS1 - Flash - Reprogramming
Len Sabatine
- Call for standards: EPROM/cal editing
Len Sabatine
- New Prom
Len Sabatine
- New Prom
Len Sabatine
- Call for standards: EPROM/cal editing
Len Sabatine
- News Release - Maybe this will make life a little easier
Len Sabatine
- Call for standards: EPROM/cal editing
Len Sabatine
- Call for standards: EPROM/cal editing
Len Sabatine
- what is an "emulator"?
Len Sabatine
- Call for standards: EPROM/cal editing
Len Sabatine
- Bad oxygen sensor ?
Len Sabatine
- Viruses
Len Sabatine
- Viruses
Len Sabatine
- Viruses
Len Sabatine
- Viruses
Len Sabatine
- Viruses
Len Sabatine
- head gaskets
Len Sabatine
- 730 ECM Swap
Len Sabatine
- 730 ECM Swap
Len Sabatine
- head gaskets
Len Sabatine
- head gaskets
Len Sabatine
- Question about WOT table in $8D bin
Len Sabatine
- Question about WOT table in $8D bin
Len Sabatine
- ABS ALDL comms
Len Sabatine
- ABS ALDL comms
Len Sabatine
- Question about WOT table in $8D bin
Len Sabatine
- Question about WOT table in $8D bin
Len Sabatine
- Quick question
Len Sabatine
- Contribution to GMECM (AFR Modifier.exe)
Len Sabatine
- Contribution to GMECM (AFR Modifier.exe)
Len Sabatine
- BinEditor Standard Configs?
Len Sabatine
- Ecm role expanding?
Len Sabatine
- Injector question
Len Sabatine
- Auto Power Environment
Len Sabatine
- Ecm role expanding?
Len Sabatine
- Ecm role expanding?
Len Sabatine
- drive by wire and 42V
Len Sabatine
- drive by wire and 42V
Len Sabatine
- Off: GM_Ecm role expanding into ABS?
Len Sabatine
- Distributorless ignition (I'm new around here)
Len Sabatine
- Distributorless ignition (I'm new around here)
Len Sabatine
- Ecm role expanding?
Len Sabatine
- Distributorless ignition (I'm new around here)
Len Sabatine
- Distributorless ignition (I'm new around here)
Len Sabatine
- Winbin problems
Len Sabatine
- Quick update of AFRModifier
Len Sabatine
- PWMs, 3FXXs and personal opinions.
Len Sabatine
- Ecm role expanding?Re: GMECM Digest V2 #667
Len Sabatine
- Reading Plugs
Len Sabatine
- Big Injectors in Little Engine?
Jeffrey Scott
- 730 j-body communication
Scot Sealander
- Viruses
Bill Shaw
- Halloween HEX Patches
Walter Sherwin
- Adding another O2 sensor
Walter Sherwin
- Adding another O2 sensor
Walter Sherwin
- Adding another O2 sensor
Walter Sherwin
- LS1 - Flash - Reprogramming
Walter Sherwin
- Part number for heated o2
Walter Sherwin
- Edge board scanners
Walter Sherwin
- 89 '165 Ecu for Winbin - Come and get it
Walter Sherwin
- 730 ECM Swap
Walter Sherwin
- 2 & 3 Bar Map Stuff
Walter Sherwin
- 2 & 3 Bar Map Stuff
Walter Sherwin
- AFR calc from Diacom data... was RE: Adding another O2 sensor
Walter Sherwin
- Bad oxygen sensor ?
Walter Sherwin
- MemCals Needing a Good Home...
Walter Sherwin
- MemCals Needing a Good Home...
Walter Sherwin
- MemCals Needing RFD Tweeking Before Finding A Home......
Walter Sherwin
- J N's MiniRam backfire
Walter Sherwin
- J N's MiniRam backfire
Walter Sherwin
- MemCals Needing RFD Tweeking Before Finding A Home......
Walter Sherwin
- J N's MiniRam backfire
Walter Sherwin
- MemCals Needing RFD Tweeking Before Finding A Home......
Walter Sherwin
- Just got my TPI running...questions...
Walter Sherwin
- AFR Modifier ... bugs reported
Walter Sherwin
- Ecm role expanding?
Walter Sherwin
- The Honda O2 sensor. Wide band module.
Steven Shonk
- Viruses
Sketch
- Distributorless ignition (I'm new around here)
Drew Skinner
- Distributorless ignition (I'm new around here)
Drew Skinner
- DIY EGOR sensor app
Jim Sloan
- Buick GN ECM on Ebay
DC Smith
- Message formatting
DC Smith
- what is an "emulator"?
DC Smith
- No subject
Darryl & Karen Smith
- 4.1 FI
Darryl & Karen Smith
- head gaskets
Darryl & Karen Smith
- Distributorless ignition (I'm new around here)
Darryl & Karen Smith
- Distributorless ignition (I'm new around here)
Darryl & Karen Smith
- : Re: LS1 - Flash - Reprogramming
Speartech
- MEFI 3.0
Speartech
- 165 to 730 Harness - terminal info
Speartech
- $32 - '165 ecu file ?(LT1/LS1 twist)
Speartech
- 1994 Truck ECM ??
Speartech
- Distributorless ignition (I'm new around here)
Speartech
- Call for standards: EPROM/cal editing software
Squash
- When is a heated 02 sensor necessary ?
Squash
- When is a heated 02 sensor necessary ?
Squash
- what is an "emulator"?
Squash
- Viruses
Squash
- Viruses
Squash
- Question about WOT table in $8D bin
Squash
- 1994 Truck ECM ??
Squash
- Ecm role expanding?
Squash
- Newbie help
D. Barry Stubbs
- 730 j-body communication
D. Barry Stubbs
- Fwd: ECM for sale...
D. Barry Stubbs
- New bin on incoming
D. Barry Stubbs
- Injector Size on Chevy 3.1 V6
D. Barry Stubbs
- Adding another O2 sensor
Swayze
- HUD?
Swayze
- Call for standards: EPROM/cal editing software
Swayze
- Call for standards: EPROM/cal editing
Swayze
- Viruses
Swayze
- Viruses
Swayze
- DIS Ditty
Swayze
- Ecm role expanding?Re: GMECM Digest V2 #667
Swayze
- Missing guy
TK
- Call for standards: EPROM/cal editing software
TK
- Missing guy
TK
- Missing guy
TK
- Call for standards: EPROM/cal editing
TK
- Call for standards: EPROM/cal editing
TK
- Call for standards: EPROM/cal editing
TK
- Call for standards: EPROM/cal editing
TK
- Call for standards: EPROM/cal editing
TK
- Call for standards: EPROM/cal editing
TK
- check sum calculator
TK
- Transez. was:New bin...
TK
- Transez. was:New bin...
TK
- 730 ECM Swap
Terry
- '747 + 6 Cyl + Turbo?
Barry Tisdale
- Quick question
Barry Tisdale
- 730 ECM Swap
Dan Townsend
- 730 ECM Swap
Dan Townsend
- When is a heated 02 sensor necessary ?
Dan Townsend
- Bins to upload and need for prom info
Dan Townsend
- 730 ECM Swap
Dan Townsend
- Part number for heated o2
Dan Townsend
- Big Injectors in Little Engine?
Dan Townsend
- New Prom
Dan Townsend
- New Prom
Dan Townsend
- 89 '165 Ecu for Winbin - Come and get it
Dan Townsend
- 89 '165 Ecu for Winbin - Come and get it
Dan Townsend
- 89 '165 Ecu for Winbin - Come and get it
Dan Townsend
- Message formatting
Dan Townsend
- 730 ECM Swap
Dan Townsend
- 730 ECM Swap
Dan Townsend
- Big Injectors in Little Engine?
Dan Townsend
- Big Injectors in Little Engine?
Dan Townsend
- 730 ECM Swap
Dan Townsend
- Message formatting
Dan Townsend
- 730 ECM Swap
Dan Townsend
- 730 ECM Swap
Dan Townsend
- 730 ECM Swap
Dan Townsend
- 165 to 730 ECM Swap Update
Dan Townsend
- off-list Re: general info
Dan Townsend
- 165 to 730 Harness - Final Info
Dan Townsend
- 165 to 730 Harness - Final Info
Dan Townsend
- Injector help...
Dan Townsend
- Injector question
Dan Townsend
- Need a 7165 ECM
Dan Townsend
- Need a 7165 ECM
Dan Townsend
- vette instrument cluster
Mike Turner/ENGR/HQ/KEMET/US
- MEFI 3.0
Mike Turner/ENGR/HQ/KEMET/US
- Auto Power Environment
Mike Turner/ENGR/HQ/KEMET/US
- When is a heated 02 sensor necessary ?
Bob Valentine
- Adding another O2 sensor
Bob Valentine
- TBI idle problem
Bob Valentine
- New for Old TBI intake swap
Bob Valentine
- J N's MiniRam backfire
Bob Valentine
- Viruses
Bob Valentine
- Viruses
Bob Valentine
- Timing jump at idle
Bob Valentine
- 730 ECM Swap
Bob Valentine
- Miniram Backfire Update II
Bob Valentine
- 89 $6E Code Question
Bob Valentine
- MEFI installation pictures
Bob Valentine
- 88 Police 350 specs
Bob Valentine
- Ecm role expanding?
Bob Valentine
- Re; ABS ALDL comms
Rich Vandervoort
- Ecm role expanding?
Rich Vandervoort
- Ecm role expanding?
Rich Vandervoort
- Proms bigger than 64K
Richard Wakeling
- BNBH.BIN Needed
Richard Wakeling
- PWMs... What are they?
Richard Wakeling
- PWMs, 3FXXs and personal opinions.
Richard Wakeling
- 730 ECM Swap
Robert Ward
- Viruses
Rex Weatherford
- OBDI and OBDII Scanners?
Rex Weatherford
- Ecm role expanding?
Rex Weatherford
- Fuel Injector list?
Rex Weatherford
- Anyone working with this one?
Rex Weatherford
- Anyone working with this one?
Rex Weatherford
- Auto Power Environment
Tim Welden
- Auto Power Environment
Tim Welden
- Reading Plugs
Tim Welden
- Hypertech carrier
Greg Westphal
- Calpack - Where to buy cheap?
Greg Westphal
- Question about WOT table in $8D bin
Greg Westphal
- DIS Ditty
Dave Williams
- EGOR future...was(Autronic Questions)
Garfield Willis
- Call for standards: EPROM/cal editing
Garfield Willis
- DIY EGOR
Garfield Willis
- 730 ECM Swap
Dave Zug
- ALDL stream recycle time
Dave Zug
- 730 ECM Swap
Dave Zug
- Any Advice on Shorty Plugs?
Dave Zug
- Missing guy
Dave Zug
- ALDL stream recycle time
Dave Zug
- 730 ECM Swap
Dave Zug
- 730 ECM Swap
Dave Zug
- When is a heated 02 sensor necessary ?
Dave Zug
- When is a heated 02 sensor necessary ?
Dave Zug
- Adding another O2 sensor
Dave Zug
- Any Advice on Shorty Plugs?
Dave Zug
- Any Advice on Shorty Plugs?
Dave Zug
- 730 ECM Swap
Dave Zug
- 730 ECM Swap
Dave Zug
- 730 ECM Swap
Dave Zug
- Call for standards: EPROM/cal editing
Dave Zug
- 90 TPI computer and wiring setup question???
Dave Zug
- Call for standards: EPROM/cal editing
Dave Zug
- Call for standards: EPROM/cal editing
Dave Zug
- Call for standards: EPROM/cal editing
Dave Zug
- Call for standards: EPROM/cal editing
Dave Zug
- Message formatting
Dave Zug
- (sensor swappers)
Dave Zug
- 730 ECM Swap
Dave Zug
- 730 ECM Swap
Dave Zug
- DIY EGOR
Dave Zug
- 730 ECM Swap
Dave Zug
- DIY EGOR
Dave Zug
- Call for standards: EPROM/cal editing
Dave Zug
- 730 ECM Swap
Dave Zug
- Watch for new round of virii!!!
Dave Zug
- Viruses
Dave Zug
- Viruses
Dave Zug
- 730 ECM Swap
Dave Zug
- check sum calculator
Dave Zug
- check sum calculator
Dave Zug
- Timing jump at idle
Dave Zug
- 730 ECM Swap
Dave Zug
- 730 ECM Swap
Dave Zug
- 730 ECM Swap - UPDATE
Dave Zug
- 730 ECM Swap
Dave Zug
- Hypertech carrier
Dave Zug
- 730 ECM Swap - UPDATE
Dave Zug
- Question about...
Dave Zug
- Question about...
Dave Zug
- Contribution to GMECM (AFR Modifier.exe)
Dave Zug
- LT1 ECU
Dave Zug
- Contribution to GMECM (AFR Modifier.exe)
Dave Zug
- New bin on incoming
Dave Zug
- Transez. was:New bin...
Dave Zug
- BinEditor Standard Configs?
Dave Zug
- Contribution to GMECM (AFR Modifier.exe)
Dave Zug
- Contribution to GMECM (AFR Modifier.exe)
Dave Zug
- BinEditor Standard Configs?
Dave Zug
- BinEditor Standard Configs?
Dave Zug
- BinEditor Standard Configs?
Dave Zug
- Mind Control
Dave Zug
- 730 ECM Swap
Dave Zug.
- 730 ECM Swap
Dave Zug.
- Call for standards: EPROM/cal editing
Dave Zug.
- 730 ECM Swap
Dave Zug.
- Contribution to GMECM (AFR Modifier.exe)
Dave Zug.
- AFR Modifier ... bugs reported
Dave Zug.
- Contribution to GMECM (AFR Modifier.exe)
Dave Zug.
- Contribution to GMECM (AFR Modifier.exe)
Dave Zug.
- AFR Modifier ... bugs reported
Dave Zug.
- AFR Modifier ... bugs reported
Dave Zug.
- Contribution to GMECM (AFR Modifier.exe)
Dave Zug.
- AFR Modifier ... bugs reported
Dave Zug.
- Ecm role expanding?
Dave Zug.
- 90 TPI computer and wiring setup question???
A70Duster at aol.com
- 90 TPI computer and wiring setup question???
A70Duster at aol.com
- 90 TPI computer and wiring setup question???
A70Duster at aol.com
- Analog meters
A70Duster at aol.com
- Viruses
Chipsbyal at aol.com
- Hypertech carrier
Chipsbyal at aol.com
- Diesel EFI
Chipsbyal at aol.com
- Contribution to GMECM (AFR Modifier.exe)
Chipsbyal at aol.com
- 1994 Truck ECM ??
Chipsbyal at aol.com
- 1994 Truck ECM ??
Chipsbyal at aol.com
- 1994 Truck ECM ??
Chipsbyal at aol.com
- LS1 - Flash - Reprogramming
DBonnes at aol.com
- what is an "emulator"?
DBonnes at aol.com
- what is an "emulator"?
DBonnes at aol.com
- Driver board group buy closed.
DRhoads2 at aol.com
- Combo driver group buy "NAG list"
DRhoads2 at aol.com
- Driver board shipping costs update
DRhoads2 at aol.com
- Call for standards: EPROM/cal editing software
ECMnut at aol.com
- '747 + 6 Cyl + Turbo?
ECMnut at aol.com
- '747 + 6 Cyl + Turbo?
ECMnut at aol.com
- 88-89 Turbo PFI 1.5L Isuzu
ECMnut at aol.com
- Call for standards: EPROM/cal editing
ECMnut at aol.com
- Call for standards: EPROM/cal editing
ECMnut at aol.com
- Part number for heated o2
ECMnut at aol.com
- Call for standards: EPROM/cal editing
ECMnut at aol.com
- Call for standards: EPROM/cal editing
ECMnut at aol.com
- 90 TPI computer and wiring setup question???
ECMnut at aol.com
- 90 TPI computer and wiring setup question???
ECMnut at aol.com
- 2 & 3 Bar Map Stuff
ECMnut at aol.com
- Looking for a website
ECMnut at aol.com
- 730 ECM Swap
ECMnut at aol.com
- Calpack - Where to buy cheap?
ECMnut at aol.com
- Any message packrats out there?
ECMnut at aol.com
- Shannen, newest digests coming first...
ECMnut at aol.com
- Measuring Altitude
Heelandtoe at aol.com
- DIS Ditty
JTesta1966 at aol.com
- Scope pics...
JTesta1966 at aol.com
- Open A/D lines onna '148?
JTesta1966 at aol.com
- Ecm role expanding?
JTesta1966 at aol.com
- Bruce's Car of the Month...
JTesta1966 at aol.com
- Reading Plugs
JTesta1966 at aol.com
- head gaskets
KasaRyan at aol.com
- heads are back on - made some runs and tuning
KasaRyan at aol.com
- Spark plug data
KasaRyan at aol.com
- tbi motor into 400 suburban
KasaRyan at aol.com
- drive by wire and 42V
KasaRyan at aol.com
- Any Advice on Shorty Plugs?
OneSS2NV at aol.com
- Any Advice on Shorty Plugs?
OneSS2NV at aol.com
- Bruce's Car of the Month...
OneSS2NV at aol.com
- Bruce's Car of the Month...
OneSS2NV at aol.com
- 165 knock sensor sensitivity
RDwoo10 at aol.com
- 165 knock sensor sensitivity
RDwoo10 at aol.com
- Too many BCCs, too few mask ids
RDwoo10 at aol.com
- Distributorless ignition (I'm new around here)
RDwoo10 at aol.com
- 730 ECM Swap
Tedscj at aol.com
- Just got my TPI running...questions...
Tedscj at aol.com
- Just got my TPI running...questions...
Tedscj at aol.com
- Just got my TPI running...questions...
Tedscj at aol.com
- Just got my TPI running...questions...
Tedscj at aol.com
- MEFI installation pictures
Tedscj at aol.com
- Buick GN ECM on Ebay
WEG1192 at aol.com
- MemCals Needing a Good Home...
WEG1192 at aol.com
- 730 ECM Swap
WEG1192 at aol.com
- Call for standards: EPROM/cal editing
WEG1192 at aol.com
- Call for standards: EPROM/cal editing
WEG1192 at aol.com
- 730 ECM Swap
WEG1192 at aol.com
- Call for standards: EPROM/cal editing
WEG1192 at aol.com
- 730 ECM Swap
WEG1192 at aol.com
- 730 ECM Swap
WEG1192 at aol.com
- 730 ECM Swap
WEG1192 at aol.com
- 730 ECM Swap
WEG1192 at aol.com
- 730 ECM Swap
WEG1192 at aol.com
- 730 ECM Swap
WEG1192 at aol.com
- 730 ECM Swap
WEG1192 at aol.com
- 730 ECM Swap
WEG1192 at aol.com
- 730 ECM Swap
WEG1192 at aol.com
- 730 ECM Swap (group buy)
WEG1192 at aol.com
- Help for Newbies on Spark Timing
WEG1192 at aol.com
- Help for Newbies on Spark Timing
WEG1192 at aol.com
- Call for standards: EPROM/cal editing
sapearso at collins.rockwell.com
- what is an "emulator"?
sapearso at collins.rockwell.com
- DIS Ditty
sapearso at collins.rockwell.com
- DIS Ditty
sapearso at collins.rockwell.com
- Diesel EFI
sapearso at collins.rockwell.com
- GMECM Digest V2 #636
sapearso at collins.rockwell.com
- GMECM Digest V2 #637
sapearso at collins.rockwell.com
- Is this the right place?
sapearso at collins.rockwell.com
- Ecm role expanding?
sapearso at collins.rockwell.com
- drive by wire and 42V
sapearso at collins.rockwell.com
- Ecm role expanding?
sapearso at collins.rockwell.com
- Scope pics...
don.broadus at exeloncorp.com
- Scope pics...
don.broadus at exeloncorp.com
- Scope pics...
don.broadus at exeloncorp.com
- Scope pics...
don.broadus at exeloncorp.com
- Scope pics...
don.broadus at exeloncorp.com
- 10 LED O2 monitor
don.broadus at exeloncorp.com
- 10 LED O2 monitor
don.broadus at exeloncorp.com
- Miniram Backfire Update II
don.broadus at exeloncorp.com
- Any message packrats out there?
don.broadus at exeloncorp.com
- Auto Power Environment
don.broadus at exeloncorp.com
- Calpack - Where to buy cheap?
marcho at flash.net
- Adding another O2 sensor
timsiford at hushmail.com
- Call for standards: EPROM/cal editing software
timsiford at hushmail.com
- When is a heated 02 sensor necessary ?
timsiford at hushmail.com
- When is a heated 02 sensor necessary ?
timsiford at hushmail.com
- Adding another O2 sensor
timsiford at hushmail.com
- Call for standards: EPROM/cal editing software
timsiford at hushmail.com
- Call for standards: EPROM/cal editing software
timsiford at hushmail.com
- Big Injectors in Little Engine?
timsiford at hushmail.com
- Big Injectors in Little Engine?
timsiford at hushmail.com
- 730 ECM Swap
timsiford at hushmail.com
- Bad oxygen sensor ?
timsiford at hushmail.com
- Bad oxygen sensor ?
timsiford at hushmail.com
- J N's MiniRam backfire
timsiford at hushmail.com
- J N's MiniRam backfire
timsiford at hushmail.com
- J N's MiniRam backfire
timsiford at hushmail.com
- J N's MiniRam backfire
timsiford at hushmail.com
- Viruses
timsiford at hushmail.com
- J N's MiniRam backfire
timsiford at hushmail.com
- J N's MiniRam backfire
timsiford at hushmail.com
- J N's MiniRam backfire
timsiford at hushmail.com
- Hypertech carrier
timsiford at hushmail.com
- Question about WOT table in $8D bin
timsiford at hushmail.com
- Question about WOT table in $8D bin
timsiford at hushmail.com
- Question about WOT table in $8D bin
timsiford at hushmail.com
- Question about...
timsiford at hushmail.com
- Question about...
timsiford at hushmail.com
- Question about...
timsiford at hushmail.com
- Question about...
timsiford at hushmail.com
- Question about...
timsiford at hushmail.com
- Question about WOT table in $8D bin
timsiford at hushmail.com
- Question about...
timsiford at hushmail.com
- Question about...
timsiford at hushmail.com
- More WOT AFR stuff
timsiford at hushmail.com
- Question about WOT table in $8D bin
timsiford at hushmail.com
- Question about WOT table in $8D bin
timsiford at hushmail.com
- Question about WOT table in $8D bin
timsiford at hushmail.com
- Contribution to GMECM (AFR Modifier.exe)
timsiford at hushmail.com
- Quick sidenote about AFR Modifier.exe
timsiford at hushmail.com
- Contribution to GMECM (AFR Modifier.exe)
timsiford at hushmail.com
- Contribution to GMECM (AFR Modifier.exe)
timsiford at hushmail.com
- Contribution to GMECM (AFR Modifier.exe)
timsiford at hushmail.com
- AFR Modifier ... bugs reported
timsiford at hushmail.com
- AFR Modifier ... bugs reported
timsiford at hushmail.com
- Contribution to GMECM (AFR Modifier.exe)
timsiford at hushmail.com
- Contribution to GMECM (AFR Modifier.exe)
timsiford at hushmail.com
- AFR Modifier ... bugs reported
timsiford at hushmail.com
- Contribution to GMECM (AFR Modifier.exe)
timsiford at hushmail.com
- Contribution to GMECM (AFR Modifier.exe)
timsiford at hushmail.com
- Contribution to GMECM (AFR Modifier.exe)
timsiford at hushmail.com
- BIN Tool Chest
timsiford at hushmail.com
- Contribution to GMECM (AFR Modifier.exe)
timsiford at hushmail.com
- Contribution to GMECM (AFR Modifier.exe)
timsiford at hushmail.com
- BinEditor Standard Configs?
timsiford at hushmail.com
- Quick update of AFRModifier
timsiford at hushmail.com
- Quick update of AFRModifier
timsiford at hushmail.com
- Reading Plugs
timsiford at hushmail.com
- CheckSum calculation ... ATTN Dave Zug
timsiford at hushmail.com
- Some basic questions
jkooser at impsat.com
- TBI motor into 400 suburban
jkooser at impsat.com
- Ecm role expanding?
jkooser at impsat.com
- Quick - ECM app help
akallotte at juno.com
- general info
akallotte at juno.com
- Hypertech carrier
akallotte at juno.com
- Hypertech carrier
akallotte at juno.com
- Hypertech carrier
akallotte at juno.com
- Spark plug data
akallotte at juno.com
- Schematic for 1227730 ECM
donburns at macconnect.com
- Schematic for 1227730 ECM
donburns at macconnect.com
- 1227808 - Which cars?
black maj
- 730 j-body communication
mike
- J N's MiniRam backfire
rrauscher at nni.com
- base / advance timing - TBI/TPI with distributor
rrauscher at nni.com
- Question about WOT table in $8D bin
rrauscher at nni.com
- Question about...
rrauscher at nni.com
- 7747 related questions
rrauscher at nni.com
- 7747 related questions
rrauscher at nni.com
- PWMs, 3FXXs and personal opinions.
rrauscher at nni.com
- Call for standards: EPROM/cal editing software
steve ravet
- non-programmer ??'s
steve ravet
- 10 LED O2 monitor
steve ravet
- 10 LED O2 monitor
steve ravet
- MemCals Needing a Good Home...
steve ravet
- Viruses
steve ravet
- Scope pics...
steve ravet
- Some basic questions
steve ravet
- 88 Police 350 specs
steve ravet
- 88 Police 350 specs
steve ravet
- Distributorless ignition (I'm new around here)
steve ravet
- Ecm role expanding?
steve ravet
- Reading Plugs
steve ravet
- Need a 7165 ECM
steve ravet
- Backfire
rr
- Adding another O2 sensor
rr
- mask 88h hac'd
rr
- Edge board scanners
rr
- Edge board scanners
rr
- Edge board scanners
rr
- 730 ECM Swap
rr
- JN's Minram Backfire UPDATE!
rr
- check sum calculator
rr
- Timing jump at idle
rr
- Low power 5.0 TPI
rr
- Question about WOT table in $8D bin
rr
- Question about...
rr
- Question about...
rr
- Question about...
rr
- Question about WOT table in $8D bin
rr
- BinEditor Standard Configs?
rr
- BinEditor Standard Configs?
rr
- The Honda O2 sensor. Wide band module.
rr
- AYSZ bin
rr
- DIY EGOR
thergen at svn.net
- DIY EGOR
kgil1 at tampabay.rr.com
- DIY EGOR
kgil1 at tampabay.rr.com
- '747 + 6 Cyl + Turbo?
chetwagner at uswest.net
- Gas mileage saga continues (Sorry, QUITE LONG)
chetwagner at uswest.net
- '747 + 6 Cyl + Turbo?
chetwagner at uswest.net
- '747 + 6 Cyl + Turbo?
chetwagner at uswest.net
- looking for afdz and/or albk bins
chetwagner at uswest.net
- When is a heated 02 sensor necessary ?
ae2598 at wayne.edu
- Message formatting
ae2598 at wayne.edu
- MemCals Needing a Good Home...
ae2598 at wayne.edu
- J N's MiniRam backfire
ae2598 at wayne.edu
- MemCals Needing RFD Tweeking Before Finding A Home......
ae2598 at wayne.edu
- 10 LED O2 monitor
ae2598 at wayne.edu
- PROM Size on a 165
ae2598 at wayne.edu
- ABS ALDL comms
ae2598 at wayne.edu
- Parts available from chevy 3.1L MPFI motor ('727 ECM)
ae2598 at wayne.edu
- Parts available from chevy 3.1L MPFI motor ('727 ECM)
ae2598 at wayne.edu
- 1994 Truck ECM ??
ae2598 at wayne.edu
- Auto Power Environment
ae2598 at wayne.edu
- Auto Power Environment
ae2598 at wayne.edu
- Ecm role expanding?
ae2598 at wayne.edu
- Ecm role expanding?
ae2598 at wayne.edu
- Distributorless ignition (I'm new around here)
ae2598 at wayne.edu
- Distributorless ignition (I'm new around here)
ae2598 at wayne.edu
- Ecm role expanding?
ae2598 at wayne.edu
- Need a 7165 ECM
ae2598 at wayne.edu
Last message date:
Thu Nov 30 23:19:33 GMT 2000
Archived on: Thu May 30 05:40:40 GMT 2013
This archive was generated by
Pipermail 0.09 (Mailman edition).