BinEditor Standard Configs?

[Dave Zug]

It was a general utility BIN package that did a few things and saved a bit
of time in comparisons etc.

----- Original Message -----
From: Programmer <nwester at eidnet.org>
To: <gmecm at diy-efi.org>
Sent: Sunday, November 26, 2000 8:40 AM
Subject: Re: BinEditor Standard Configs?


> Beta test of what ???
>
> Lyndon.
> ----- Original Message -----
> From: "Dave Zug" <dzug at delanet.com>
> To: <gmecm at diy-efi.org>
> Sent: Saturday, November 25, 2000 6:55 PM
> Subject: Re: BinEditor Standard Configs?
>
>
> > We are.. well I'm working on the AFR graph section I set up when the
> thread
> > started and the formula was posted (yea same formula as in the HACS but
I
> > concentrated on it when it became of interest)... got me thinking about
> > going a few steps farther than I had gone. I'm working towards not just
> the
> > % modifier, but trying to get a real WOT AFR based on the other vars. I
> > didn't *want* to use the stoich AFR to change fueling for the nitrous
> setup,
> > but I did and now I need to transfer an exact equivelant curve over to
the
> > result with the stoich AFR set back to stock. the new graph let me do
that
> > very easily. In short, if the user has changed his Stoich AFR then the
> > numbers your program puts out may mislead him if they are not
compensated
> > for. I have mine working now and it serves to point out the stoich
change
> > from stock if it has been changed.
> >
> > I have the 'winbin' standard in use for the config files, but the GUI is
> so
> > single purpose and self serving its a mess... never planned on anyone
> using
> > it. WHen the other standard is finished I think I'll keep winbin
> standard..
> > it was enough work implementing that I hate to lose the time. I'll
> probably
> > make a conversion utility section from winbin to the NEW standard in the
> > package.
> >
> > I had sent a beta of this program to a few folks 15 months ago but never
> got
> > any feedback. Not unusual, they prolly had better stuff themselves, so I
> > just kept it to myself and added along the year.... the AFR thing is the
> > most recent and winbin standard I did when the standards thread went
thru
> > the list.  I have other far fetched functions that fell on their faces
but
> > are still incorporated for the day I really understand more.
> >
> > ----- Original Message -----
> > From: <timsiford at hushmail.com>
> > To: <gmecm at diy-efi.org>
> > Sent: Saturday, November 25, 2000 10:35 AM
> > Subject: Re: BinEditor Standard Configs?
> >
> >
> > > I second Dave on this one.  The architecture of the program that I am
> > working
> > > on will be setup in such a manner that I could modify the program to
> > become
> > > a fully bin editor.  However, I am not going to approach this unless
> there
> > > is a standard.
> > >
> > > Geez Dave ... sounds like we are working on the same sort of thing ;-)
> > >
> > > Tim
> > >
> > >
> > > At Fri, 24 Nov 2000 15:49:31 -0800, "Dave Zug" <dzug at delanet.com>
wrote:
> > >
> > > >
> > > >What happened to the topic on the BIN Editor software "personality
file
> > > >standard" discussion?
> > > >
> > > >I been punching at a little package and had set it up to incorporate
> > > >the
> > > >standard, but lost sight of the thread...
> > > >
> > > >Anything agreed upon yet?
> > > >
> > > >
> > > >--------------------------------------------------------------------
> > > >--------
> > > >To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
> quotes)
> > > >in the body of a message (not the subject) to
> majordomo at lists.diy-efi.org
> > > >
> >
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> >
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org