Contribution to GMECM (AFR Modifier.exe)

[timsiford at hushmail.com]

Bruce,

Specifically looking for ....
1) Is PE enrichment dependent on RPM and Coolant Modifiers (similar to $32,
 $6E and $8D)?  Is it dependent on anything else that I should be aware 
of?
2) If so, what are the start and end addresses in the BIN for these arrays? 
 
3) Is the WOT PE AFR calculation with this mask the same as the WOT PE AFR 
calculation for the $32, $6E and $8D?

Basically, I am very skeptical about adding this mask to the program unless 
I am comfortable that I understand the data behind it (as any programmer). 
 I want to please the masses by adding it but I don't have the time or motivation 
to research the LT1 speed density system right now.  Plus, I don't own one 
of these engine management systems so I would rather gather this information 
from an individual who truly understands this system.

Tim

At Wed, 22 Nov 2000 14:37:35 -0500, "Bruce Plecan" <nacelp at bright.net> wrote:

>
>
>
>I have a few notes on that, If you can tell me specifically what you 
>want I
>may be able to help some
>Bruce
>
>
>
>----- Original Message -----
>From: <timsiford at hushmail.com>
>To: <gmecm at diy-efi.org>
>Sent: Wednesday, November 22, 2000 12:52 PM
>Subject: Re: Contribution to GMECM (AFR Modifier.exe)
>
>
>> Question,
>>
>> Can someone point me in the direction of a hac of the LT1 SD system 
>so
>that
>> I can view the PE stuff?  I don't want to add it until I actually 
>review
>> some sort of hac firsthand regarding the PE stuff.
>>
>> Tim
>>
>>
>> At Wed, 22 Nov 2000 11:34:39 -0500, Len Sabatine <sabatine at epix.net>
>wrote:
>>
>> >
>> >    Your utility program is a very useful tool. Great work. I would
>> >have to
>> >support
>> >    Al's lobby effort to include LT1s' .
>> >    Len
>> >
>> >>AL,
>> >>
>> >>My next release will contain the updates to include $6E, $32, and 
>$AA
>> >(thanks
>> >>BOB).  I will also incorporate a compare utility so that one can 
>compare
>> >>2 files.  I will keep this e-mail on file and possibly incorporate
>> >it into
>> >>the following release along with 3D graphing.
>> >>
>> >>Tim
>> >>
>> >>
>> >>At Tue, 21 Nov 2000 20:13:43 EST, Chipsbyal at aol.com wrote:
>> >>
>> >> >
>> >> >
>> >> >Tim I think what you've done is super helpful. No need to grab 
>a
>> >calculator
>> >> >for every chip. Not to be pushy but can this new program be used
>> >on
>> >> >the
>> >> >LT1's. The masks for them are DA and EE/EF. If you need help with
>> >addresses
>> >> >I
>> >> >can supply them.
>> >> >AL
>> >> >
>> >> >www.chipsbyal.com
>> >> >
>> >> >
>> >
>> >-----------------------------------------------------------------
>---
>> >--------
>> >To unsubscribe from gmecm, send "unsubscribe gmecm" (without the 
>quotes)
>> >in the body of a message (not the subject) to majordomo at lists.diy-
>efi.org
>> >
>
>--------------------------------------------------------------------
>--------
>To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
>in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>