Diesel EFI
Rob Higgins
rhiggins at interfusion.net.au
Thu Nov 16 12:13:45 GMT 2000
Ive had some experience with these in australia & depending on the temp they
dont like being started cold. towards zero deg C. other than that i cant
help
Rob
----- Original Message -----
From: <sapearso at collins.rockwell.com>
To: <gmecm at diy-efi.org>
Sent: Thursday, November 16, 2000 7:15 PM
Subject: Diesel EFI
>
> Have a bit of a strange one, see if anyone can help. I have a 94 Chevy
> truck with a 6.5 turbo diesel. It's having a cold start problem. After
> cycling the glow plugs, you have to hold it about quarter to half throttle
> to get it to start, then it smokes alot (like can't see thru it alot).
> Here's what's been done recently: new electronic injection pump, new crank
> sensor, new timing chain & gears. The injectors were 'pop' tested while
the
> engine was apart and checked good.
> The first injection pump I put on was faulty. I took it to the dealer
and
> they put the second one on. The first one not only had the cold start
> problem, but it also stumbled off idle, no matter how warm. This one runs
> great once it's started. The dealer told me that it was probably a crank
> sensor. Put the o'scope on it and it looks fine.
>
> Any ideas???
>
> Scott Pearson
> sapearso at collins.rockwell.com
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
----- End of forwarded message from owner-gmecm at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org
More information about the Gmecm
mailing list