Big Injectors in Little Engine?

[Dan Townsend]

Doh...  I was trying to say that is what I am getting with the 24's to see
if "I" should move up to 30#.

Dan

----- Original Message -----
From: "JN" <jwn at sgi.net>
To: <gmecm at diy-efi.org>
Sent: Monday, November 06, 2000 1:04 PM
Subject: Re: Big Injectors in Little Engine?


> My stock 22 pounders at 800 RPM are 1.9pw.  Manual tranny 350 minirammed
89
> vette.  I plan on running 30 pounders when the 396 small block drops in.
I
> never thought a 30 pound injector would work in a 350 even with the
injector
> constant changed.  If I knew this I would have installed the 30 pounders
> when I put the miniram in.
>
> Jason
>
>
> ----- Original Message -----
> From: "Dan Townsend" <xybertron at cox-internet.com>
> To: <gmecm at diy-efi.org>
> Sent: Monday, November 06, 2000 1:00 PM
> Subject: Re: Big Injectors in Little Engine?
>
>
> > I will respond so someone can compare and see if it is ok to go from 24#
> to
> > 30# injectors.
> >
> > At idle of 700rpm's I have a pulse width of 2 to 2.2 and this a 350 with
> > Auto
> >
> > Dan
> >
> > From: "Bruce Plecan" <nacelp at bright.net>
> > To: <gmecm at diy-efi.org>
> > Sent: Monday, November 06, 2000 8:54 AM
> > Subject: Re: Big Injectors in Little Engine?
> >
> > > Jus curious what idle speed, pulse widths, tranny, ya got.
> > > Thanks
> > > Bruce
> > >
> > >
> > >
> > > > I am running SVO 30's in my 350 '90 IROC with 0 problems.  Of
course,
> I
> > > > adjusted the injector constant to 33lb/hr and am running 45psi at
the
> > > rail.
> > > >
> > > > Tim

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org