New Prom

[Len Sabatine]

    The final proof will be what the scan logs are reporting , especially 
after a brief relearn
    time period and more importantly , how it drives and runs through the 
entire Op range.
    The Devil is always in the details.
    Len

>I went and got all 12's and also the fan/fans would also turn on just like
>the old days.  So I guess it is all good :-)  Thanks.
>
>Dan
>
>----- Original Message -----
>From: "Len Sabatine" <sabatine at epix.net>
>To: <gmecm at diy-efi.org>
>Sent: Saturday, November 04, 2000 11:10 AM
>Subject: Re: New Prom
>
>
> > For sure "12" is indicating " [Dist ]  Ign Reference" at the beginning of
> > the sequence. Fp relay will toggle at this point as well , telltale
> > signs that instructions are executing. Sometimes  , no Fp relay toggle and
> > fans run [ if equipped] @ key on is a sign of a
> > programming or Eprom error gotchas.
> >   Len
> >
> > >Seems like applying the 'ol ALDL jumper, moving the key to "RUN", and
> > >observing  the check eng light flashing "12" repeatedly indicates the ECM
> > >is executing the .bin.
> > >
> > >Anyone disagree?
> > >
> > >-Kevin
> > >
> > >At 01:20 AM 11/4/00 -0600, you wrote:
> > > >>>>
> > >
> > >>What is the easiest way to tell if the new prom is being used?  I have
> > >>successfully created my first chip (I think) and I just want to double
> > >>check before I head out with Diacom for tuning.
> > >>
> > >>Dan - Newbie
>
>----------------------------------------------------------------------------
>To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
>in the body of a message (not the subject) to majordomo at lists.diy-efi.org

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org