Question about WOT table in $8D bin

[Len Sabatine]

    Humans make "guesstimate"[s].  ECM s' respond  to what information they
    gather from sensor inputs and adjust operating parameters to the best set
    of circumstances possible at that point in time. The adjustment [s] go 
as far
    as the default values in place. They're constantly working to drive the 
fuel
    values to stoich, from there it's truth or consequences. Data stream parms
    are a good barometer of conditions , unfortunately what we see is after the
    fact. Reading spark plugs tells it like it is in the combustion chamber.
    Len

>It is....   But as far as I know it's only a "guesstimate" on the ECM's part
>? :)
>
>
>----- Original Message -----
>From: <rrauscher at nni.com>
>To: <gmecm at diy-efi.org>
>Sent: Wednesday, November 15, 2000 9:38 AM
>Subject: Re: Question about WOT table in $8D bin
>
>
> >
> > The end result AFR should be available through the aldl stream.
> >
> > BobR.
> >
> > >
> > >
> > >>Just remember you said that <g>
> > >
> > >I'll remember Bruce <g>.  But, I'm not a fluke.  I've talked to several
> > >other AFR190/MiniRam ownders that are running the same type of spark
>advance
> >
> > >(max).  Now sure about the Air/Fuel ratio they are running though.  Will
> > >be pulling plugs soon to take a gander.
> > >
> > >Curious though .... I have a feeling that you think I'm gonna blow myself
> >
> > >up :-)  Can I pick your mind and ask why?  I know that I will eventually
> > >lose the bottom end ... but, I don't think that it will be PROM related.
> > >
> > >Tim
> > >--Hushpart_boundary_eYvmZstygnGXAipUacYxZzmLZmTFfPtA--
> > --------------------------------------------------------------------------
>--
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> >
>
>----------------------------------------------------------------------------
>To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
>in the body of a message (not the subject) to majordomo at lists.diy-efi.org

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org