Transez. was:New bin...

[TK]

Naw, sounds too pat. 8^)

----- Original Message -----
From: Romans, Mark <romans at starstream.net>
To: <gmecm at diy-efi.org>
Sent: Thursday, November 23, 2000 10:42 AM
Subject: Re: Transez. was:New bin...


> GM changed the designations to try and remove confusion.
> 125, 125c (With clutch converter)
> Now called 3T40
>
> First designation is always the number of speeds in the trans.
>
> Second designation is
> T = Transverse mounted
> L = Longitudinally mounted
>
> Third = relative torque capacity in Newton-Meters
>
> Fourth (If applicable) is E for Electronically shifted.
> So   Old designation   New designation
>         125 and 125c        3T40
>         44T4                        4T60 and 4T60E
>         700R4                    4L60 and 4L60E
>         TH400                    4L80 and 4L80E
>
> There are a ton more too!
>
> Mark
> ----- Original Message -----
> From: "TK" <terryk at foothill.net>
> To: <gmecm at diy-efi.org>
> Sent: Thursday, November 23, 2000 9:29 AM
> Subject: Re: Transez. was:New bin...
>
>
> > No, the 440 is the 4 spd, 125 is the 3 spd. The 440 and 4T60 are pretty
> much
> > the same. The 4T60E is the electronic version. I didn't think the 4T60E
> was
> > used as early as 92 on the 3.1L. Only certain 3800's and 3.4L DOHC.
> >
> > At least I've never seen one on the motor that early.
> >
> > Terry
> > .
> >
> > ----- Original Message -----
> > From: Dave Zug <dzug at delanet.com>
> > To: <gmecm at diy-efi.org>
> > Sent: Thursday, November 23, 2000 12:23 PM
> > Subject: Re: Transez. was:New bin...
> >
> >
> > >
> > > Thats what I meant to say. 4T60E.
> > >
> > > Isn't the THM-125C aka 440-T4?
> > >
> > > the 5 speed Fiero tranny is called what?
> > >
> > > Anyone heard of a '383 Getrag' manual FWD trans and know the AKA?
> > >
> > >
> > >
> > > ----- Original Message -----
> > > From: Programmer <nwester at eidnet.org>
> > > To: <gmecm at diy-efi.org>
> > > Sent: Thursday, November 23, 2000 11:42 PM
> > > Subject: Re: New bin on incoming
> > >
> > >
> > > > Maybe a 4T60E ??
> > > >
> > > > Lyndon.
> > > > ----- Original Message -----
> > > > From: "Dave Zug" <dzug at delanet.com>
> > > > To: <gmecm at diy-efi.org>
> > > > Sent: Thursday, November 23, 2000 12:07 PM
> > > > Subject: Re: New bin on incoming
> > > >
> > > >
> > > > > A guess: 4L60E
> > > > >
> > > > > ----- Original Message -----
> > > > > From: D. Barry Stubbs <z24man at earthlink.net>
> > > > > To: <gmecm at diy-efi.org>
> > > > > Sent: Thursday, November 23, 2000 6:43 AM
> > > > > Subject: Re: New bin on incoming
> > > > >
> > > > >
> > > > > > Ross Myers wrote:
> > > > > > >
> > > > > > > >From a 92 3.1V6 GP.
> > > > > > >
> > > > > > > ASHH5658.bin
> > > > > > >
> > > > > > > Bye,
> > > > > > > Ross Myers
> > > > > >
> > > > > > Transmission?  Thanks.
> > > > > >
> > > > > >
> > >
========================================================================
> > > > > > D. Barry Stubbs
> > > http://surf.to/z24man
> > > > > > (478) 745-9429                                     AOL IM:
> thez24man
> > > > > > z24man at earthlink.net          BNet Member #828     ICQ #5409648
> > > > > > #101STS MidGa Region SoloII   94 Q4 5spd Aqua Z26  88 2.8 5Spd
> White
> > > Z24
> > > > >
> > > >
> > >
> >
>
> --------------------------------------------------------------------------
> > > > > --
> > > > > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
> > > quotes)
> > > > > > in the body of a message (not the subject) to
> > > > majordomo at lists.diy-efi.org
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>
> --------------------------------------------------------------------------
> > > > --
> > > > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
> > quotes)
> > > > > in the body of a message (not the subject) to
> > > majordomo at lists.diy-efi.org
> > > > >
> > > >
> > >
> >
>
> --------------------------------------------------------------------------
> > > --
> > > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
> quotes)
> > > > in the body of a message (not the subject) to
> > majordomo at lists.diy-efi.org
> > > >
> > > >
> > >
> >
>
> --------------------------------------------------------------------------
> > --
> > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
quotes)
> > > in the body of a message (not the subject) to
> majordomo at lists.diy-efi.org
> > >
> > >
> >
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> >
> >
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org