Winbin problems

[Programmer]

Can't stand to see someone struggle...been there myself.
Here's the one I've made for the 7747.
Lyndon.
-----Original Message-----
From: Mathieu Blais <fireb76 at videotron.ca>
To: gmecm at diy-efi.org <gmecm at diy-efi.org>
Date: November 28, 2000 8:26 PM
Subject: Winbin problems


>ok, I seem to have a lot of problems trying to load any of the 747 bins
with
>different ecus files I was able to find on around.  The most important bin
I
>need to get to work on would be the arpc7509, which I only know that it for
>a 5.0L manual.  If anyone would have a bin for a 747 around 89 5.0L manual,
>4x4 and with TBI.  Well any manual 5.0L bin would be really appreciated.
>And then a nice and working ecu would also be really appreciated, and is
>even more important than a bin at this point.  I really don't know why it
>give me errors when the ecu and bin is entered, because they should match?
>By the way, you can send me the files attached to a message directly to my
>email.
>
>maybe one other question, if I got a 747 from a 4.3L that I would like to
>use on a 5.0L, could I just burn a eprom that would be for a 5.0L, would
>that solve the problem or will the there be a problem anyway? Since it's a
>TBI, if I just put some extra fuel and maybe adjust the timming curve a
bit,
>maybe it would be correct?
>
>    Math B
>    fireb76 at videotron.ca
>
>---------------------------------------------------------------------------
-
>To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
>in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org