10 LED O2 monitor

don.broadus at exeloncorp.com don.broadus at exeloncorp.com
Tue Nov 14 20:03:10 GMT 2000


A 260 Simpson meter is just a bunch of resistors, if you were luckily you
had 1000 ohms per volt impedance   
AND WE LIKED IT !!!!!
> -----Original Message-----
> From:	Bruce Plecan [SMTP:nacelp at bright.net]
> Sent:	Tuesday, November 14, 2000 11:04 AM
> To:	gmecm at diy-efi.org
> Subject:	Re: 10 LED O2 monitor
> 
> 
> Some of the old stuff was like less then 10.
> Hmm, radio shack.
> I got away from the analogs for auto use 15+ years ago.
> may have to revisit that.
> Bruce
> 
> 
> 
> > Do the analog VOMs have that low of an input impedance?  I have a radio
> > shack analog that uses an FET front end, it claims to have a 10M input
> > impedance for voltage measurement
> >
> >  On Tue, 14 Nov 2000, Bruce Plecan wrote:
> >
> > >
> > > O2 sensor is not hardly designed to drive such a low resistance devise
> as a
> > > VOM.  Shouldn't be any less then 20K ohms per volt for reading an O2.
> > >
> > > Best idea in not even bothering with trying to read a switching O2
> other
> > > then >.4 rich, <.4 lean.  Other then that your just kidding yourself
> > > Bruce
> > >
> > >
> > >
> > > >why
> > > > even screw around with an led display when all you need is a 0-1V
> analog
> > > > volt meter....try to find an old simpson 260 or triplett 310 VOM.
> it'll do
> > > > just fine and will probably have a better response time for that
> matter.
> > >
> > >
> >
> >
> --------------------------------------------------------------------------
> --
> > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
> quotes)
> > > in the body of a message (not the subject) to
> majordomo at lists.diy-efi.org
> > >
> > >
> >
> >
> >
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
> majordomo at lists.diy-efi.org
> >
> >
> 
> --------------------------------------------------------------------------
> --
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org


*********************************************************************************
This E-mail and any of its attachments may contain Exelon Corp. proprietary
information, which is privileged, confidential, or subject to copyright 
belonging to the  Exelon Corp. family of Companies.  This E-mail is intended
solely for the use of the individual or entity to which it is addressed.  If
you are not the intended recipient of this E-mail, you are hereby notified
that any dissemination, distribution, copying, or action taken in relation
to the contents of and attachments to this E-mail is strictly prohibited
and may be unlawful.  If you have received this E-mail in error, please
notify the sender immediately and permanently delete the original and
any copy of this E-mail and any printout.  Thank You.
*********************************************************************************
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org




More information about the Gmecm mailing list