165 to 730 Harness - terminal info

[Speartech]

The 12146448 and 12146447 are the latest part numbers for the ECM terminals.
They are direct replacements for the 12089649 and 12089660 listed below. I
prefer the 12146448 for the 18 ga. wire I normally use. This info is direct
from the 1998 Packard Product Handbook.

        John




>Date: Wed, 15 Nov 2000 17:54:50 +1100
>From: Peter Gargano <peter at techedge.com.au>
>Subject: Re: 165 to 730 Harness - Final Info
>
>Dan Townsend wrote:
>
>> (200) 12089660-L
>
>Dan, these are the female terminals that push into the plastic
>housing (ie. "the connector) - Yes?
>
>I just got two samples from Pioneer/Packard and they are part
>numbers:
>
>>   >   Part #    Cable Range (mm 2)   Material Plating
>>   >   -----------------------------------------------
>>   >   12146448  1.0-0.80             Copper Nickel Alloy Tin
>>   >   12146447  0.50-0.35            Copper Nickel Alloy Tin
>
>I'm trying to work out if your part number 12089660-L is really 
>the same part. Also, I've seen part number 12089649 that has
>been used for a similar application.
>
>Anyone have any ideas on these different part numbers?
>
>TIA, Peter.

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org