New setup....need some help!

[Squash]

Have you read the tuning tips on the diy-efi.com/gmecm page?  

I wouldn't worry about the cell until you need to start tuning the VE tables.  It sounds like you
haven't changed your idle speed anyways.  What is your idle speed?

Squash

--- Kevin R <KEReyn at gte.net> wrote:
> > Also, if you aren't running the
> > original idle rpm, you should change the setting for the "idle cell".
> This will change the cell
> > number it uses when correcting for closed-loop idle.
> 
> By this do you mean the desired closed loop idle speed or is there another
> cell that tells the computer which fuel cells are being used for idle.
> 
> Kevin R
> 
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> 


__________________________________________________
Do You Yahoo!?
Yahoo! Photos - 35mm Quality Prints, Now Get 15 Free!
http://photos.yahoo.com/
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org