Help- Idle is driving me NUTS!

[ECMnut at aol.com]

Grump has some good points..  Also, make sure the timing table
is pretty flat where it is now idling, which is prolly to the right of
where it was idling with the stock cam...
Mike V
> 
>  Need to just stop take a break, and double check things from the beginning.
>  Set your timing,
>  set min idle,
>  check for vac leaks,
>  how is the MAP plumbed
>  Once you have all the mechanics right then look at editing.
>  IAC counts are alot higher then what I try for.
>  Some engines take some large timing changes to get a decent idle.
>  6's with a cam are lumpy,
>  All I'll address is the BLs, I tune to what an engine wants,
>  Bruce
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org