Help- Idle is driving me NUTS!

[Reid Bishop]

> I'm about to tear my hair out.  I simply cannot get my 4.3 to idle
properly

(Bruce replies...)

>>Need to just stop take a break, and double check things from the
beginning.
>>Set your timing,

I currently have my static timing set to 9BTC (I am at 6300 feet, so more
timing is usually required.  Does anybody have the stock static setting for
a 4.3?

>> set min idle

This is difficult to do, even with the ECM.  I have no mechanical throttle
adjustment, and the 1228062 ECM has no idle speed base that I can get to
with WinTuner.  It only has adders for coolant temp.  I don't recall this
setting in the '7747 either.

>> check for vac leaks

Have checked, but find none.... but I admit I am not a master leak detector.
Any tricks?

>> how is the MAP plumbed

Full stock setup here... MAP is plumbed via plastic tubing that is tapped
into the TBI.  All tubing and hardware is in primo condition.

>>IAC counts are alot higher then what I try for.

I agree, however I am at 6300 feet... would that account for higher IAC
counts?

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org