7747 spark control questions.

[Bruce Plecan]

Yep,  danced in that parade.
er, maybe stepped in, would be a better term.

That's part of what lead me to the try several bins, and see which one works
best in what areas.  An then start patching or using some stuff from each.
Bruce


> Digression alert:
> Ever see the pump-shot values in that bin? They are seven times the
duration
> of a 5.7l bin! (ARHT) To get a decent throttle response on my 327 TBI, I
split
> the difference between the 5.7l bin and the ANTZ bin. I had originally
added
> 20% to the 5.7l bin, and it had no effect. I then added another 20%, no
> effect. Finally did the above change. Worked!
> BobR.
> Shannen Durphey wrote:
> > Here's an example of exactly what I meant.  ANTZ8364, 89 3/4 ton
> > w/454.  Base timing 4deg BTDC, base timing value in ECM, 4 deg.  That
> > way the timing values in the table reflect timing at the engine.
> > BTW, I placed antz8364.bin in incoming.
> > Complete specs:
> > ANTZ8364  1988 3500, RVCK, 454, 4SPDMAN, 3.42/3.73 REAR GEAR, 7747ECM
> > Shannen
> <snip>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org