Injector Pricing was RE: initial timing

[Marteney, Steven J.]

On a similar note, and pertaining to some recent posts on SVO injectors
versus TPI ones, just got my Summit catalog today.  In the new products
section they are advertising Accel brand injectors.  Set of 8 from 19 lb/hr
to 30lb/hr are priced from $200-$250.  Then, I think, 36lb/hr set of 8 is at
$300.  Don't know if they are any good, but thought I would share the
information.

Steve

-----Original Message-----
From: timsiford at hushmail.com [mailto:timsiford at hushmail.com]
Sent: Wednesday, October 25, 2000 12:07 PM
To: gmecm at diy-efi.org
Subject: Re: initial timing

>Also, how do we know when our injectors are maxed out?

Heh heh.  You'll get lots of answers on this one :-)  IMHO - I believe that 
if you are hitting 90+% Duty Cycles at max RPMs at WOT then you should
*consider* 
a swap.  If you are at 95-100% DCs at max RPMs at WOT then I would bypass 
the 'consider swap' and just swap them.

Tim

>
>Regards,
>
>Dan
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org