165 ECU File

[NRG]

From: "Bruce Plecan" <nacelp at bright.net>
To: <gmecm at diy-efi.org>
Sent: Saturday, October 28, 2000 10:19 AM
Subject: Re: 165 ECU File


>
> > Well my Diacom wont hook up to his 165 ECM for some reason or any other
> non
> > 730 GM ECMs for that matter. I guess I need some sort of special adapter
> for
> > my cable or something. So I can't put a scan tool on it :(
>
> Looking at the wiring between the two ALDL connectors might explain that.

Well I know the difference. The locations of the data stream outputs are
different... but that's not the problem here.

>
> > I'm sure a couple degrees wont hurt anything, since his timing looks
very
> > conservative plus he's using 92 gas which can only help prevent any
> > potential detonation.
>
> This is exactly why folks have long term problems.
> Leads to remarkable tuning like adding 10d to all the WOT stuff, 15 to may
> retard in PE, then just rely on the K/S to protect the motor, then in 6
> months wonder why the headgaskets / rod bearings / rings are junk.
> Bruce

A couple of degrees means 2 in my book not 10. I would never add that much
w/out looking at the knock counts first to see if it will ping or not.

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org