165 ECU File

[Dan Townsend]

Wow I didn't figure this many people would want it.  With the added interest
I am taking the time to verify it and add anything that might be missing.
Should be done later today and then I will post it.  I'll keep everyone
informed on my progress.  As of now I have verified 3 Map's plus fan turn
on/off and 10 Arrays plus the MAF arrays.  Now I need to see if I am missing
any Arrays and Maps and then double check the Value section.  I don't have
any of the flags ;-(

BTW - This 165 is based off a 89 bin.  This will allow you to unhook the
cold start valve and block it off if you want.  I still need to find out how
to disable VATS with this ecu.

If anyone wants to help that has an aftermarket proggie and can modify a bin
and return it to me then please e-mail me so I can figure out the locations
of the flags like VATS.  Thanks.

Dan

----- Original Message -----
From: "Programmer" <nwester at eidnet.org>
To: <gmecm at diy-efi.org>
Sent: Sunday, October 29, 2000 12:53 AM
Subject: Re: 165 ECU File


> Cool--wouldn't mind a copy.
> Lyndon
> -----Original Message-----
> From: Dan Townsend <xybertron at cox-internet.com>
> To: gmecm at diy-efi.org <gmecm at diy-efi.org>
> Date: October 28, 2000 11:22 AM
> Subject: Re: 165 ECU File
>
>
> >I have been working on the 165 ecu and am stopping since I am going to
the
> >730 setup.  If you want my ecu file just lemme know.  For the checksum
just
> >do all your work on the chip and then open the bin with GMEpro demo and
it
> >will tell you what the checksum should be.
> >
> >Dan

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org