LT-1 Heads

[Shannen Durphey]

Not without serious work.  They have no coolant passages, so that will
have to be accounted for.  The bolts are in a different location, and
the area which must be machined for the distributor hole is very thin,
so you may end up reinforcing it to hold the dizzy.
BTDT.
Shannen

WEG1192 at aol.com wrote:
> 
> Ok, last question about the LT-1. Even though the heads are reverse flow,
> will the LT-1 port injection manifold fit the "old" style Gen-1 heads with
> the canted intake center bolts? Are the ports moved around?
> 
> Thanks,
> 
> John Wilson
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org