Traction Control

[Len Sabatine]

    Is your Z28 Equipped with the OPTION Hardware and on the Parts List 
Label in glove box ?
    If your rear axles BOTH have a reluctor / transducer on them , you have 
Traction Control. If not , It's a
    non issue , far as what I've seen. Non TC have 1 x 'ducer above ring 
gear , on top of axle housing.

    Len

>Tunercat has a selection and table for traction control for my 94 Z28 
>which is enabled,  but traction control isn't engaged.  Does anyone know 
>if there is an electrical switch to enable traction control?  If so on 
>which pin does the signal enter the PCM?  I
>don't see anything labeled 'Traction control' on the PCM pinout document.
>
>Bill
>
>----------------------------------------------------------------------------
>To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
>in the body of a message (not the subject) to majordomo at lists.diy-efi.org

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org