Pocket Programmer Info?

[Mark S. Riley]

Thanks Guys, transistor was it. replaced and now working fine. Mark
----- Original Message -----
From: "DC Smith" <morepoweral at tetranet.net>
To: <gmecm at diy-efi.org>
Sent: Thursday, August 02, 2001 2:34 PM
Subject: Re: Pocket Programmer Info?


> I was going by senile memory here. The correct file name for the manual
> is fileprom.doc.
>  The transistor is a 2n4401 or MPS2222. Not a big deal to change. It's
> on the bottom of the board.
>
> DC Smith wrote:
> >
> > It's a garden variety radio shack transistor. 2 different part numbers
> > listed in the manual (on the disk) ALSO A t-shooting program for
> > checking voltages to verify the transistor program. Take a look at the
> > program disk for a manual.txt file.
> >  Typing in 88 with the software running starts the t-shooting program.
> >  The transistors are ~50 cents each at the "shack". I have spares all
>
> --
> ***********************************************************************
> Dan Smith      84 Regal   11.841 at 115.09     GSCA# 1459
> St.Charles, Missouri
> mailto:morepoweral at tetranet.net
> http://www.tetranet.net/users/morepoweral
> ***********************************************************************
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org