TGP boost solinoid stuff

[Barry Tisdale]

I don't know specifically, but the SyTy solenoid has one "in" port
(pressure source), one "out" port (to the solenoid) and the vent port,
which is next to the "out" port - there is a small foam air filter over
this one.

Barry - Sy#26

At 08:39 PM 8/7/01 -0400, Barry wrote:
>Does anyone happen to have any pics or diagrams of the vacuum line
>routing for the boost controller solenoid on the TGP?  I see three ports
>at the solenoid, one of which I assume goes to the port on the turbine
>housing, but I'm unsure on the rest.
>
>TIA,
> 
>--Barry
>z24man at bellsouth.net
>AIM: thez24man
>88 2.8 5spd Z24 15.8 at 85
>94 Q4 5spd Z26 15.9 at 88
>88 2.8 5spd GTU
>
>----------------------------------------------------------------------------
>To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
>in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org