Test of DIY-WB

[Brian L Massey]

On Thu, 16 Aug 2001 09:40:45 -0400 "rr" <rrauscher at nni.com> writes:
> 
> Had a chance to do some testing yesterday. Swapped out
> the perf-board prototype for the PCB version of the WB.
<.......>
> This is good. It looks like I didn't miss any traces! <g>.

This won't affect people who use the pre-made pc board, but since I'm
building to my own form-factor on perf, there seems to be a slight errata
needed on the diagram for the heater control.

Bob, in your "Note:" on the right of the heater control drawing, it says
"parallel R1 w/6.8 ohm ...". Shouldn't that be *R4*? Just a nit really.
Tnx.

Brian


________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org