Turbo V8

[ECMnut at aol.com]

<< 
> Use use a 1227749 ecm.  For more info., try www.syty.org.
> There is a complete editor for it there.
> Bruce
I second that.  Use the Syclone code and set the 
cylinder byte for 8 cyl.  Same volume in a cylinder
from a 4.3 as a cylinder from a 5.7.  Use approx 
30lb injector to start and very little hacking required.  
If you DO need to do alot of chipping, syty.org has 
a big slow Java based chip editor for download.
Terry K has a GME Pro file for it too.  Terry's cost
a little money, but it will run on an 286 if you have too.
Mike V
<< 
 Use use a 1227749 ecm.  For more info., try www.syty.org.
 There is a complete editor for it there.
 Bruce
  
 From: J812MANY at aol.com 
 Subject: Re: Turbo V8
 mine is an '88 Camaro, right now its stripped down with a mild 350/TH350. 
 I'll email you the specifics if youre interested. 
  >>
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org