Need recommendations on tools.

[Robert W. Hughes]

Guess it's time for the cheapskates to chime in. Harbor Freight has a
real nice screwdriver set for about $15 with 31, #2, #3 Phillips and
similar flat blades. They have blue four sided handles (like Snapons),
the shank goes all the way through the handle and has a hex on the end,
and they are strongly magnetized. You can use a wrench on them to
increase torque, or hammer them when using them in the normal fashion as
prybar, punch, chisel. I have had a set for several years and they are
holding up very well, better than my old SnapOns. Some of their sockets
are pretty good too.
-- 
Robert W. Hughes (Bob)
BackYard Engineering
29:40.237N, 95:28.726W or perhaps 30:55.265N, 95:20.590W
Houston, Texas "The city with too much Oxygen"
rwhughe at ev1.net
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org