Accel injectors

[Diane Stowe]

I have a similar question on Accel injectors. Summit has sets for very
attractive prices. I need a set of 8 for my stock 350, most places have sets
for $445 +. Summit has sets for $280+ ? They are bosch injectors I think.

If you all don't mind a beginner question or two ?

for a stock 350 what #lb rating should my injectors have ? different vendors
tell me different things.

the set I received with my used tpi setup, are I'm told a 305 set, which
would run too lean for a 350. However I have also been told that the 305
injectors would work fine in a 350 up to something like 350-375 HP.

some of my used injectors are missing the clips, the pintle caps on some are
broken or missing.  one such injector has the pintle ? retracted or pushed
back in.

so at 15-20+ dollars apiece to get them rebuilt, it would seem that the
summit set would be a better idea. However they have several different #lb
sizes for a 350 tpi, and I don't know which set I would use.

if anyone could help that would be great, I'd appreciate it.

thanks, and a happy new year to everyone

Diane
----- Original Message -----
From: <akallotte at juno.com>
To: <gmecm at diy-efi.org>
Sent: Saturday, January 06, 2001 5:22 AM
Subject: Accel injectors


> Has anyone used the Accel injectors?  Accel says they are rated at 3 bar,
> 14.4 ohm, and are pintle type.  They say they are stock length
> replacements for TPI.  Are they the same as SVOs?  Or are they actually
> closer to the stock TPI injector?
> ________________________________________________________________
> GET INTERNET ACCESS FROM JUNO!
> Juno offers FREE or PREMIUM Internet access for less!
> Join Juno today!  For your FREE software, visit:
> http://dl.www.juno.com/get/tagj.
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org