Accel injectors

[Dan Townsend]

Stock 305 is 19#
Stock 350 is 22#

Several individuals including myself use 24# SVO's with no problems.

Dan

----- Original Message -----
From: "Diane Stowe" <DianeS at speakeasy.org>
To: <gmecm at diy-efi.org>
Sent: Saturday, January 06, 2001 11:50 AM
Subject: Re: Accel injectors


> I have a similar question on Accel injectors. Summit has sets for very
> attractive prices. I need a set of 8 for my stock 350, most places have
sets
> for $445 +. Summit has sets for $280+ ? They are bosch injectors I think.
>
> If you all don't mind a beginner question or two ?
>
> for a stock 350 what #lb rating should my injectors have ? different
vendors
> tell me different things.
>
> the set I received with my used tpi setup, are I'm told a 305 set, which
> would run too lean for a 350. However I have also been told that the 305
> injectors would work fine in a 350 up to something like 350-375 HP.
>
> some of my used injectors are missing the clips, the pintle caps on some
are
> broken or missing.  one such injector has the pintle ? retracted or pushed
> back in.
>
> so at 15-20+ dollars apiece to get them rebuilt, it would seem that the
> summit set would be a better idea. However they have several different #lb
> sizes for a 350 tpi, and I don't know which set I would use.
>
> if anyone could help that would be great, I'd appreciate it.
>
> thanks, and a happy new year to everyone
>
> Diane
> ----- Original Message -----
> From: <akallotte at juno.com>
> To: <gmecm at diy-efi.org>
> Sent: Saturday, January 06, 2001 5:22 AM
> Subject: Accel injectors
>
>
> > Has anyone used the Accel injectors?  Accel says they are rated at 3
bar,
> > 14.4 ohm, and are pintle type.  They say they are stock length
> > replacements for TPI.  Are they the same as SVOs?  Or are they actually
> > closer to the stock TPI injector?
> > ________________________________________________________________
> > GET INTERNET ACCESS FROM JUNO!
> > Juno offers FREE or PREMIUM Internet access for less!
> > Join Juno today!  For your FREE software, visit:
> > http://dl.www.juno.com/get/tagj.
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> >
> >
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org