Accel injectors

[Tedscj at aol.com]

In a message dated 1/6/01 11:45:59 PM Eastern Standard Time, ae2598 at wayne.edu 
writes:

> I, too, have heard that a 350 can get away with 19#'ers at a
>  higher-than-stock pressure.  It has been said that, all things equal,
>  you'll run better that way because of better fuel atomization.
>  
>  Anyone care to confirm/deny this?  Any of you guys running a 350 with 19#
>  injectors?
>  


Well,
The TPI unit I bought came with some 19lb injectors and a 42psi (according to 
my gauge) regulator.  I put it on my rather mild, but hotter than stock, 350. 
 I haven't got to tuning the engine yet, but they manage to run rich at full 
throttle and 5000rpm.  This is with the stock AUJP bin and the Injector 
constant set to 20lb.  I was under the assumption (correct or incorrect) that 
the 19lb is at 36psi and that with 42psi it would be about 20.5lb/hr (ran the 
constant at 20lb to give myself a safety margin).
Ted
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org