eprom carrier eliminator

[Steven Ciciora]

I made some, but currently un-tested.  Anybody want to try one?

- Steven Ciciora

On Sun, 9 Jan 2000, Marc Piccioni wrote:

> I would like any feedback if this is something that would be useful.
> 
> With the demise of GM eprom carriers from Robert Nugent or at least very 
> pricey we need a better solution. As Bruce P. mentioned a while back the 
> lead spacing on the RN carriers is .550" wide, while a standard 24 pin 
> eprom is .600" wide.
> 
> The solution is a small adapter PCB that would be soldered to the ECM in 
> place of the RN carrier base and you can then plug the eprom into a eprom 
> socket.
> 
> /Marc
> 
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> 

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org