VE and BLM cell edges

[Dave Zug]

The map setting for the error code. you gotta up-it (don't disable it, its
valuable!)


----- Original Message -----
From: JimSloan <leroy at sunflower.com>
To: <gmecm at diy-efi.org>
Sent: Saturday, January 20, 2001 7:30 AM
Subject: RE: VE and BLM cell edges


> > I can say that the VSS being non functional in MY car, when repaired,
was
> > the ONLY thing repaired and immediately the cells started recording and
> > changing with RPM and MAP.
> >
> > since then, they change and record and never got stuck again, so
> > I was very
> > confident that NO VSS was the cause.
> >
> > while I'm typing so much, and FWIW, the next hurdle I hit was the EGR
code
> > at cruise speeds (non egr heads). I took the speed setting and threw it
to
> > 145 mph insted of zeroing all the values in the EGR table (saves
> > keystrokes
> > ;-)  Another common snag in cammed engines is the HI-MAP (lo
> > vacuum) error..
>
> What's the cure for the Hi-map error?
>
> Jim Sloan
> leroy at sunflower.com
> >
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org