Suggestions

[Squash]

Sounds like a job for a 1227730 to me!  Cam?  What cam?  

Squash

--- William McNett <mcnett at mail.cass.net> wrote:
> I know this is a ECM list, but.
> Does anyone have any suggestions on an programmable EFI system for a 383
> making a little over 400 hp?
> Drivability is a big plus.
> I'd also like to have the ability to monitor what's happening.
> One guy told me that a speed density sys. would not work with my cam.
> 
> I can get a stock 86-88 TPI sys. off a Vette for $850.
> 
> 
> Thanks,
> Bill
> 
>  http://www.cass.net/~mcnett/william/my383.html
> Cam Specs:
> COMP CAMS 12-242-2
> Advertised duration: 268 intake / 280 exhaust
> Duration at .050 in. cam lift: 224 intake / 230 exhaust
> Gross valve lift: .477 in. intake / .480 in. exhaust
> w/ 1.6 rockers: .509 in. intake /  .512 in. exhaust
> Lobe separation: 110 degrees
> Intake centerline: 106 degrees
> RPM range: 1,600 to 5,800
> 
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> 


=====
Trains, Trucks, and EFI at http://www.trailrunners4x4.org/users/realsquash

__________________________________________________
Do You Yahoo!?
Yahoo! Auctions - Buy the things you want at great prices. 
http://auctions.yahoo.com/
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org