Suggestions

[mcnett at mail.cass.net]

That little Comp's Xtreme Energy listed below.
According to Comp, should pull 15 to 17" of vacuum at an 850 rpm.

Squash wrote:

> Sounds like a job for a 1227730 to me!  Cam?  What cam?
>
> Squash
>
> --- William McNett <mcnett at mail.cass.net> wrote:
> > I know this is a ECM list, but.
> > Does anyone have any suggestions on an programmable EFI system for a 383
> > making a little over 400 hp?
> > Drivability is a big plus.
> > I'd also like to have the ability to monitor what's happening.
> > One guy told me that a speed density sys. would not work with my cam.
> >
> > I can get a stock 86-88 TPI sys. off a Vette for $850.
> >
> >
> > Thanks,
> > Bill
> >
> >  http://www.cass.net/~mcnett/william/my383.html
> > Cam Specs:
> > COMP CAMS 12-242-2
> > Advertised duration: 268 intake / 280 exhaust
> > Duration at .050 in. cam lift: 224 intake / 230 exhaust
> > Gross valve lift: .477 in. intake / .480 in. exhaust
> > w/ 1.6 rockers: .509 in. intake /  .512 in. exhaust
> > Lobe separation: 110 degrees
> > Intake centerline: 106 degrees
> > RPM range: 1,600 to 5,800
> >
> > ----------------------------------------------------------------------------
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> >
>
> =====
> Trains, Trucks, and EFI at http://www.trailrunners4x4.org/users/realsquash
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Auctions - Buy the things you want at great prices.
> http://auctions.yahoo.com/
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org